EMD-WRF On-Demand ICING
This dataset and service is currently being integrated with windPRO 3.6 (beta).
Please contact our technical specialist Marie Cecilie Pedersen (email@example.com) for more information and schedule.
EMD-WRF OD ICING is the name of EMD’s icing model. It is available as a time-series product, similar to the well known EMD-WRF OD service. The model is fully validated: A technical note with results from from recent validation study on EMD-WRF OD ICING is available , see further below for the download link.
The EMD-WRF OD ICING model is configured with the following setup:
- Driven by an icing configuration of the standard EMD WRF  On-Demand service .
- Run with a spatial resolution of 3x3 km and an hourly temporal resolution.
- Using the ERA-5 reanalysis data from ECMWF as global boundary data , see Table 2 below.
- Microphysics from Thompson scheme is used for parameterization of the cloud physics and the MYJ scheme for the planetary boundary layer physics , .
- The median volume diameter (MVD) by  is used, with a constant droplet concentration (Nc) of (default) 100 cm-3 and the liquid water content (LWC) in kg/m3 .
- Atmospheric data feeds into the standard cylinder-based model ,  including melting and shedding .
- The WRF grid point (latitude, longitude) closest to the at mast location or site location is used as a default.
- The grid point holds a certain elevation above sea level and icing is modelled as a default for 15 heights in the vertical direction above ground level (agl.).
- The modelled ice load (kg) is used to identify hours of instrumental icing based on the industry standard thresholds of 10 g . And similar from the modelled ice accretion rate (g/h), hours of meteorological icing  is found using the threshold of 10 g/h .
- The modelled icing results (IEA loss/class and meteorological icing hours) are downscaled to the terrain elevation height of the Copernicus DEM’s  for making icing maps.
The final step of EMD’s modelling chain, is an estimate of the expected production loss of a site which is found by using the IEA Ice Classification system seen in Table 1 below. A wide range of climate parameters will be availabe form a model-run; the complete list of parameters are seen in the Table 2 further below.
| Meteorological Icing
(% of year)
| Instrumental Icing
(% of year)
| Production loss|
(% of AEP)
|5||> 10.0||> 20.0||> 20.0|
|4||5.0 - 10.0||10.0 - 30.0||10.0 - 25.0|
|3||3.0 - 5.0||6.0 - 15.0||3.0 - 12.0|
|2||0.5 - 3.0||1.0 - 9.0||0.5 - 5.0|
|1||0.0 - 0.5||< 1.5||0.0 - 0.5|
Interested in the performance of the EMD-WRF On-Demand ICING modelling chain and a validation study?
A validation paper by Petersen et al is availble. It was presented at the International Workshop on Atmospheric Icing of Structures 2022:
On the Modelling Chain for Production Loss Assessment for Wind Turbines in Cold Climates. The paper is availabe as a pdf-file here.
What you get and how to order?
To get pointwise-timeseries data, you need meso-credits (one credit is worth one month of data). Credits can be ordered here: http://www.emd.dk/windpro/online-ordering/
Please note, that a time period of 10 seasons will include the complete icing analysis, whereas shorter time periods include only raw timeseries. Complete icing analysis includes:
- Icing reports as pdfs at three hub-heights - 100m, 150m and 200m
- Including predicted AEP loss
- Icing maps at three hub-heights - 100m, 150m and 200m
- IEA ice class, IEA Ice loss (% AEP) and modelled meteorological icing (icing rate > 10 g/h)
- The possibility to use your icing results and timeseries directly in your windPRO project
- Monthly, yearly and seasonal icing analysis and bin-sector analysis as csv-files
- Timeseries of raw WRF data and modelled icing
All EMD-WRF OD ICING is available with global spatial coverage. The temporal availability and update frequency depends on a number of factors such as availability from the boundary data providers, bandwidth and download times, as well as availability on EMD high-performance computing and storage systems. EMD-WRF OD ICING is availability with the ERA5 only, see table below.
|Dataset||First date||Most recent date|
|EMD-WRF OD (ERA5)||1999.01.01||2-3 months from present day|
Set of Standard Dataset Parameters for EMD-WRF OD ICING
A large quantity of useful parameters are available directly in WindPRO to aid in your analysis. The different parameters in each On-Demand ICING dataset is shown in the list below.
Unless other specification, x is the vertical heights of: 10m, 25m, 50m, 75m, 100m, 150m, 200m, 300m, 400m, 500m, 600m, 1000m.
|time||UTC time stamp|
|psfc||Pa||Pressure at site||Instantaneous|
|msl||Pa||Pressure at mean sea level||Instantaneous|
|wSpeed.0-30mb||m/s||Wind speeds at pressure level 0-30mb.||Instantaneous|
|wDir.0-30mb||deg||Wind speeds at pressure levels 0-30mb.||Instantaneous|
|wSpeed.850hpa||m/s||Wind speeds at pressure level 850hPa.||Instantaneous|
|wDir.850hpa||deg||Wind speeds at pressure levels 850hPa.||Instantaneous|
|temperature.2||celcius||Temperatures at height 2m||Instantaneous|
|soilTemp.0-10cm||celcius||The temperature in the upper 10cm of the soil||Instantaneous|
|relHumidity.2||%||Relative humidity in height 2m above ground level||Instantaneous|
|snowDepth||m||Snow depth (if present)||Instantaneous|
|vis.s||m||Visibility at surface||Instantaneous|
|sensHeatFlux.s||w/m2||Sensible Heat Flux at surface||Instantaneous|
|totPrecip.s||kg/m^2||Total Precipitation at surface||1h Accumulated|
|downShortWaveFlux.s||w/m^2||Downward shortwave irradiance at surface||1h Average|
|totalCloudCover.a||%||Total cloud cover in atmosphere||1h Average|
|convCloudCover.a||%||Convective cloud cover in atmosphere||1h Average|
|u*||m/s||U-star (friction velocity)||Instantaneous|
|swdDir.s||W/m^2||Direct shortwave irradiance at surface||1h Average|
|swdDni.s||W/m^2||Direct normal shortwave irradiance at surface||1h Average|
|swdDif.s||W/m^2||Diffusive shortwave irradiance at surface||1h Average|
|sqrtTKE.x||m/s||Wind speed given as standard deviation in m/s. Derived from the turbulent kinetic energy (TKE)||Instantaneous|
|cloudWater.x||mg/kg||Cloud water content||Instantaneous|
|cloudIce.x||mg/kg||Cloud ice content||Instantaneous|
|cloudBottom||m||Distance from ground level to the bottom of cloud||Instantaneous|
|cloudTop||m||Distance from ground level to the top of cloud||Instantaneous|
|Ice model output parameters.|
|iceInten.x||g/h||Ice accretion rate (intensity) ||Instantaneous|
|MIce.x||kg||Ice load on a standard cylinder ||Instantaneous|
|MeteoSignal.x||Meteorological icing, iceInten.x > 10g/h ||Instantaneous|
|InstruSignal.x||Instrumental Icing, MIce.x > 10g ||Instantaneous|
|MVD.x||m||Median Volume Diameter ||Instantaneous|
|LWC.x||kg/m^3||Liquid Water Content ||Instantaneous|
- W. C. Skamarock, J. B. Klemp, J. G. D. O. Dudhia, D. M. Barker, W. Wang and J. G. Powers, “A description of the advanced research WRF version 2,” NCAR Technical Note, Boulder, Colorado, USA, 20005.
- M. L. Thøgersen, “help.emd.dk,” EMD International A/S, 2019. [Online]. Available: https://help.emd.dk/mediawiki/index.php?title=EMD-WRF_On-Demand_and_Custom-Area. [Accessed 30 November 2021].
- ECMWF, “Advancing global NWP through international collaboration,” ECMWF, [Online]. Available: https://www.ecmwf.int/. [Accessed 23 March 2022].
- G. Thompson, P. R. Field, R. M. Rasmussen and W. D. Hall, “Explicit Forecasts of Winter Precipitation Using an Improved Bulk Microphysics Scheme. Part II: Implementation of a New Snow Parameterization,” American Meteorological Society, vol. 136, no. Monthly Weather review, pp. 5095-5115, 2008.
- Z. I. Janjic, “Nonsingular Implementation of the Mellor-Yamada Level 2.5 Scheme in the NCEP Meso model,” National Centers for Environmental Prediction, Washington, 2001.
- K. Finstad, E. Lozowski and L. Makkonen, “On the median volume diameter approximation for droplet collision efficiency,” Journal of Atmospheric Sciences, vol. 45, pp. 4008-4012, 1988.
- G. Thompson, B. E. Nygaard, L. Makkonen and S. Dierer, “Using the Weather Research and Forecasting (WRF) model to predict ground/structural icing,” in International Workshop on Atmospheric Icing on Structures (IWAIS), 2009.
- L. Makkonen, "Models for the Growth of Rime Glaze Icicles and Wet Snow on Structures," Royal Society, vol. 1776, no. Ice and Snow Accretion on Structures, pp. 2913 - 2939, 2000.
- ISO, "DS/ISO 12494:2017 Atmospheric icing on structures," Danish Standard Association, København, 2017.
- K. Harstveit, “Using Metar-data to Calculate In-cloud Icing on a Mountain Site Near by the airport,” in 13th International Workshop on Atmospheric Icing on Structures (IWAIS), Andermat, Switzerland, 2009.
- K. Hämäläinen and S. Niemelä, “Production of a Numerical Icing Atlas for Finland,” Wind Energy, vol. 20, pp. 171-189, 2017.
- I. Baring-Gould, R. Cattin, M. Durstewitz, M. Hulkkonen, A. Krenn, T. Laakso, A. Lacroix, E. Peltola, G. Ronsten, L. Tallhaug and T. Wallenius, "13 Wind Energy Projects in Cold Climate 1st edition," IEA Wind Task 19, 2011.
- L. Makkonen, "Modelling of Ice Accretion on Wires," Climate Appl. Meteor., vol. 23, pp. 929-939, 1984.
- M.C. Pedersen, T. Ahsbahs, W. Langreder, M.L. Thøgersen: On the Modelling Chain for Production Loss Assessment for Wind Turbines in Cold Climates, Proceedings – Int. Workshop on Atmospheric Icing of Structures, IWAIS 2022 - Montreal, Canada, June 19-23 (pdf-here)
- M. L. Thøgersen, “help.emd.dk,” EMD International A/S, 2021. [Online]. Available: https://help.emd.dk/mediawiki/index.php?title=Copernicus_DEM. [Accessed 09 August 2022].