Category:WindPRO 3.5 Service Pack 1: Difference between revisions

From Wiki-WindPRO
Jump to navigation Jump to search
No edit summary
mNo edit summary
 
(24 intermediate revisions by the same user not shown)
Line 1: Line 1:
Below you will find a list of all issues fixed in Service Pack 1:
Below you will find a list of all issues fixed in Service Pack 1:


This Service Pack contains corrections to bugs reported by users. Thanks to all for submitting feedback.
This Service Pack contains corrections to bugs and comments reported by users. Thanks to all for submitting feedback.


===BASIS===
===BASIS===
*Changed Help link to point to EMD support page {{Templink35SP1|01_2890}}
*Solved problem that TIN calculation during calculations can be very slow if the calculation area is not covered completely with elevation data. {{Templink35SP1|01_2901}}
*Solved problem that TIN calculation during calculations can be very slow if the calculation area is not covered completely with elevation data. {{Templink35SP1|01_2901}}
*- {{Templink35SP1|01_2903}}
*If the computer loses the connection to a network drive so a .wpo cannot be found, windPRO will no longer overwrite it with an empty file once connection is re-established. {{Templink35SP1|01_2935}}
*Added ability to export Area polygons as .grd files {{Templink35SP1|01_2905}}
*Fixed problem that Photomontage window sometimes freezes for short periods {{Templink35SP1|01_2908}}
*Loading a window layout from before version 3.1 no longer gives an exception {{Templink35SP1|01_2921}}
*Loading a window layout from before version 3.1 no longer gives an exception {{Templink35SP1|01_2921}}
*Fixed issue where multi-editing Shadow receptors would not properly save changes for receptor's slope {{Templink35SP1|01_2945}}
*Fixed issue where importing coordinates from a GPX file would not allow deleting individual points {{Templink35SP1|01_2926}}
*Fixed issue where importing coordinates from a GPX file would not allow deleting individual points {{Templink35SP1|01_2926}}
*If the computer loses the connection to a network drive so a .wpo cannot be found, windPRO will no longer overwrite it with an empty file once connection is re-established. {{Templink35SP1|01_2935}}
*Fixed issue where multi-editing Shadow receptors would not properly save changes for receptor's slope {{Templink35SP1|01_2945}}
*Fixed issue where having many World file background maps some parts would not be rendered {{Templink35SP1|01_2954}}
*Fixed issue where having many World file background maps some parts would not be rendered {{Templink35SP1|01_2954}}
*Fixed issue which prohibited adding some external WMS map servers {{Templink35SP1|01_2957}}
*Added ability to export Area polygons as .grd files {{Templink35SP1|01_2905}}
*Updated information in About window {{Templink35SP1|01_2955}}
*Updated information in About window {{Templink35SP1|01_2955}}
*Fixed issue which prohibited adding some external WMS map servers {{Templink35SP1|01_2957}}
*Changed Help link to point to EMD support page {{Templink35SP1|01_2890}}
*- {{Templink35SP1|01_2959}}
*Added shortcuts for Calculation tester, WAsPResCalc and EMDPlayer in start menu {{Templink35SP1|21_0206}}
{{Templink35SP1|01_2903}}{{Templink35SP1|01_2959}}
 
===DECIBEL===
*Fixed error where Ground attenuation would be initialized incorrectly for "Danish Codes"-model {{Templink35SP1|06_0359}}
*Fixed error in calculation of Danish 1991 (BEK 304) noise code {{Templink35SP1|06_0360}}
*Fixed issue when running Finnish noise model in combination with a mix of turbines using both PowerMatrix and Power/Noise pairs {{Templink35SP1|06_0354}}
*German Interimsverfahren now uses emission side uncertainty by default {{Templink35SP1|06_0351}}
*Added option to not show NSA-wise uncertainty on main report {{Templink35SP1|06_0350}}
 
===HYBRID===
*Fixed an error in the hourly minimum demand power values in report {{Templink35SP1|63_0148}}
*Changed report layout for wind cost model {{Templink35SP1|63_0146}}
*Fixed typo {{Templink35SP1|63_0149}}
 
===LOSS & UNCERTAINTY===
*Fixed error which underestimated curtailment losses when a huge amount of curtailment conditions per WTG were defined. If you think that this could have a significant impact on your project, make sure to recalculate losses in Loss & Uncertainty. {{Templink35SP1|27_0196}}
*Fixed issue by copy-pasting of curtailments {{Templink35SP1|27_0179}}{{Templink35SP1|27_0191}}
{{Templink35SP1|27_0197}}{{Templink35SP1|27_0198}}
 
===MCP===
===MCP===
*Fixed issue where the Measure tab would not calculate correlation (r) values if miniscule time shifts were present. {{Templink35SP1|03_0198}}
*Fixed issue where the Measure tab would not calculate correlation (r) values if miniscule time shifts were present. {{Templink35SP1|03_0198}}
*Fixed misspelling in Session report {{Templink35SP1|03_0200}}
*Fixed misspelling in Session report {{Templink35SP1|03_0200}}
*Updated the mouseover hint next to "Show with residuals" to reflect the changes made between version 3.4 and 3.5 {{Templink35SP1|03_0202}}
*Updated the mouseover hint next to "Show with residuals" to reflect the changes made between version 3.4 and 3.5 {{Templink35SP1|03_0202}}
===METEO===
*Fixed error in correction for magnetic declination: if magnetic declination correction has been used, we recommend applying the new correction and update relevant calculations {{Templink35SP1|25_0774}}{{Templink35SP1|25_0779}}
*Fixed issues related to re-loading data after changes made in recalibration table {{Templink35SP1|25_0754}}{{Templink35SP1|25_0781}}{{Templink35SP1|25_0761}}{{Templink35SP1|25_0773}}{{Templink35SP1|25_0797}}{{Templink35SP1|25_0801}}
*Fixed issue about handling of empty cells in calibration factors.
*Fixed issues in the presentation of the (re)calibration table
*Fixed issue in calibration table occurring in the case of several import filters and several calibration periods defined manually: the factor corrections are now applied to the defined calibration period independently of the import filter. We recommend reloading the data if relevant.
*Fixed issues about the path to imported meteo data file (from file export or .wpobject export, including case with file mask) {{Templink35SP1|25_0760}}
*Fixed issue about creating synthesized heights of imported time series
*Fixed issue when clicking "Clear and load all" for >30 heights {{Templink35SP1|25_0772}}


===PARK===
===PARK===
*Fixed annoyance where various window labels would say "CFD area" or "WAsP", when using a .flowres file {{Templink35SP1|04_0764}}
*Fixed issue where having too many curtailment criteria, the result-table in the report Production analysis would sometimes be hidden behind the charts. {{Templink35SP1|04_0771}}
*Fixed error with wrong sign being used when defining asymmetrical no-RIX correction intervals {{Templink35SP1|04_0773}}
*Fixed error with wrong sign being used when defining asymmetrical no-RIX correction intervals {{Templink35SP1|04_0773}}
*Updated link to blockage description at main tab {{Templink35SP1|04_0778}}
*Fixed issue where a warning message would sometimes not be shown when the selected temperature signal for curtailment evaluation had low availability {{Templink35SP1|04_0781}}
*Fixed issue where a warning message would sometimes not be shown when the selected temperature signal for curtailment evaluation had low availability {{Templink35SP1|04_0781}}
*Fixed issue where having too many curtailment criteria, the result-table in the report Production analysis would sometimes be hidden behind the charts. {{Templink35SP1|04_0771}}
*Fixed issue where the "Edit WAsP parameters" button in scaler setup would not turn yellow {{Templink35SP1|04_0790}}
*Fixed annoyance where various window labels would say "CFD area" or "WAsP", when using a .flowres file {{Templink35SP1|04_0764}}
*Fixed typo for reference of Forsting's paper on blockage. The reference year has been corrected to 2017 {{Templink35SP1|04_0793}}
*Fixed typo for reference of Forsting's paper on blockage. The reference year has been corrected to 2017 {{Templink35SP1|04_0793}}
*Updated link to blockage description at main tab {{Templink35SP1|04_0778}}
===Performance Check===
*Fixed a typo in "User Error code setup" {{Templink35SP1|33_0648}}
*Added ability to view Load/Review tab for the "Error codes in time series" concept {{Templink35SP1|33_0650}}
===PHOTOMONTAGE===
*Fixed problem that Photomontage window sometimes freezes for short periods {{Templink35SP1|01_2908}}
*Fixed problem with Auto Adjust feature {{Templink35SP1|11_0301}}


===RESSOURCE===
===RESOURCE===
*RESOURCE doesn't ask for coordinate system after rescaling any more {{Templink35SP1|05_0094}}
*RESOURCE no longer ask for coordinate system after rescaling {{Templink35SP1|05_0094}}
*A few bug-fixes in Resource-maps calibrations {{Templink35SP1|05_0097}}
*Fixed issue with an error message in STATGEN "meteo object must be inside the CFD result area" by STATGEN calculation with WAsP CFD. {{Templink35SP1|02_0271}}
*A few bug-fixes in Resource-maps calibrations {{Templink35SP1|05_0098}}
*A few bug-fixes in Resource-maps calibrations {{Templink35SP1|05_0097}}{{Templink35SP1|05_0098}}{{Templink35SP1|05_0099}}
*A few bug-fixes in Resource-maps calibrations {{Templink35SP1|05_0099}}


===DECIBEL===
===SITE COMPLIANCE===
*Added option to not show NSA-wise uncertainty on main report {{Templink35SP1|06_0350}}
*Fixed issue with incorrect WTG type in Details & assumptions report. {{Templink35SP1|29_0399}}
*German Interimsverfahren now uses emission side uncertainty by default {{Templink35SP1|06_0351}}
*Fixed issue with TI values displayed as zero when using GASP data {{Templink35SP1|29_0413}}
*Fixed issue when running Finnish noise model in combination with a mix of turbines using both PowerMatrix and Power/Noise pairs {{Templink35SP1|06_0354}}
*When using siteres: Other checks Earthquake and Lightning rate are now enabled pr default. Temperature check disabled {{Templink35SP1|29_0401}}
*Fixed error where Ground attenuation would be initialized incorrectly for "Danish Codes"-model {{Templink35SP1|06_0359}}
*Hint added for reloading siteres files after changing design class or IEC edition {{Templink35SP1|29_0402}}
*<span style="color:#FF0000">Missing description</span> {{Templink35SP1|06_0360}}
*Changed description for frequency table based Meteo data {{Templink35SP1|29_0407}}
*Weibull fit for extreme cases has been made very robust. Should erroneous cases occur sector weight is set to zero. {{Templink35SP1|29_0409}}
*Updated link for lightning map {{Templink35SP1|29_0411}}


===SHADOW===
===SHADOW===
*Worst case WTG results now only appear on report if worst case calculation is selected in calculation properties {{Templink35SP1|07_0213}}
*Defining the lower left (C) coordinate of a window now result in the same coordinates as defining lower right (D) with the calculated coordinates from C {{Templink35SP1|07_0214}}
*Fixes issue where saving time series as result to file with many receptors could cause an exception {{Templink35SP1|07_0218}}
*Fixes issue where saving time series as result to file with many receptors could cause an exception {{Templink35SP1|07_0218}}
*Fixed issue where calculating SHADOW and deactivating line of sight could cause an exception {{Templink35SP1|07_0219}}
*Fixed issue where calculating SHADOW and deactivating line of sight could cause an exception {{Templink35SP1|07_0219}}
*Defining the lower left (C) coordinate of a window now result in the same coordinates as defining lower right (D) with the calculated coordinates from C {{Templink35SP1|07_0214}}
*Worst case WTG results now only appear on report if worst case calculation is selected in calculation properties {{Templink35SP1|07_0213}}
===ZVI===
*Fixed issue in Radar Object where the user-defined Z value would be overridden by the TIN, even if TIN was deselected. {{Templink35SP1|08_0054}}
*The Radar altitude is now printed in the report {{Templink35SP1|08_0056}}
===SketchUp Integration tool===
===SketchUp Integration tool===
*Fixed bug where the export would fail if exporting both "all visible objects" and "all selected objects" at the same time {{Templink35SP1|13_0043}}
*Fixed bug where the export would fail if exporting both "all visible objects" and "all selected objects" at the same time {{Templink35SP1|13_0043}}
*Fixed bug where selecting to export a wtg with a user-defined rotor angle would anyway be exported with a random rotor angle {{Templink35SP1|13_0046}}
*Fixed bug where selecting to export a wtg with a user-defined rotor angle would anyway be exported with a random rotor angle {{Templink35SP1|13_0046}}
*Fixed issue that SketchUp would not load after saving project to new folder. {{Templink35SP1|13_0050}}
*Small visual fix in CFD export window {{Templink35SP1|13_0049}}
*The wtg direction can now be entered {{Templink35SP1|13_0048}}
*The wtg direction can now be entered {{Templink35SP1|13_0048}}
*Small visual fix in CFD export window {{Templink35SP1|13_0049}}
*Fixed issue that SketchUp would not load after saving project to new folder. {{Templink35SP1|13_0050}}
===METEO===
*Fixed issue where Meteo object .wpobject exports which referred to folders with a file mask would be saved in the project folder after re-imported, instead of the original file mask location {{Templink35SP1|25_0751}}
*Fixed issue where merging two recalibration lines would sometimes be split again after closing and reopening the object {{Templink35SP1|25_0754}}
*<span style="color:#FF0000">Missing description</span> {{Templink35SP1|25_0757}}
*When unpacking a project export, Meteo data now points to the relative path of the current project location, instead of the original absolute path from where the project was exported from. {{Templink35SP1|25_0760}}
*Fixed issue in Recalibration, where empty, 0 or 1 values for scale and offset would not be correctly handled {{Templink35SP1|25_0761}}
*<span style="color:#FF0000">Missing description</span> {{Templink35SP1|25_0762}}
*Fixed issue where right clicking an averaged sample in a gun shot graph could cause an exception {{Templink35SP1|25_0763}}
*Fixed issue when clicking "Clear and load all" for >30 heights {{Templink35SP1|25_0772}}
*Fixed issue where recalibration would not be performed after loading additional data without visiting the Calibration page {{Templink35SP1|25_0773}}
*Fixed error where the resulting correction does not consider any applied magnetic declination {{Templink35SP1|25_0774}}
*<span style="color:#FF0000">Missing description</span> {{Templink35SP1|25_0775}}
*<span style="color:#FF0000">Missing description</span> {{Templink35SP1|25_0777}}
*Fixed error where manually inputting magnetic declination would calculate a wrong resulting calibration {{Templink35SP1|25_0779}}
*Fixed error where calibration would not always include the last sample {{Templink35SP1|25_0781}}
*<span style="color:#FF0000">Missing description</span> {{Templink35SP1|25_0785}}
*Edited help text in "Merge wind speeds from 2 heights" {{Templink35SP1|25_0787}}
*Added message to reload data after changing calibrations {{Templink35SP1|25_0797}}
*Added ability to create a calibration period per import filter {{Templink35SP1|25_0801}}
*Fixed issue where all the min/max columns in the RSD verification tool were swapped {{Templink35SP1|26_0156}}


===LOSS & UNCERTAINTY===
===SOLAR PV===
*Fixed issue by copy-pasting of curtailments {{Templink35SP1|27_0179}}
*Fixed error where the total design area would not be the sum of all areas, but instead just the size of the last area {{Templink35SP1|58_0255}}
*Fixed issue by copy-pasting of curtailments {{Templink35SP1|27_0191}}
*Resolved an issue in LOSS&UNCERTAINTY, which underestimated curtailment losses when a huge amount of curtailment conditions per WTG were defined. {{Templink35SP1|27_0196}}
*- {{Templink35SP1|27_0197}}
*- {{Templink35SP1|27_0198}}
===SITE COMPLIANCE===
*Fixed issue with incorrect WTG type in Details & assumptions report. {{Templink35SP1|29_0399}}
*When using siteres: Other checks Earthquake and Lightning rate are now enabled pr default. Temperature check disabled {{Templink35SP1|29_0401}}
*Hint added for reloading siteres files after changing design class or IEC edition {{Templink35SP1|29_0402}}
*Changed description for frequency table based Meteo data {{Templink35SP1|29_0407}}
*Added a warning when using checks based on energy weighted values, but there are sectors without energy. {{Templink35SP1|29_0409}}
*Updated link for lightning map {{Templink35SP1|29_0411}}


===TR10===
===TR10===
*Fixed error with incorrect gap-filling of production time series {{Templink35SP1|60_0185}}
*Fixed error with incorrect gap-filling of production time series {{Templink35SP1|60_0185}}
*Fixed issue where windPRO could get stuck when using the feature "separate error codes" {{Templink35SP1|60_0186}}
*Fixed issue where windPRO could get stuck when using the feature "separate error codes" {{Templink35SP1|60_0186}}
*- {{Templink35SP1|60_0187}}
*Fix in the correlation formula in the detailed method. {{Templink35SP1|60_0189}}
*Fix in the correlation formula in the detailed method. {{Templink35SP1|60_0189}}
*Added a default file name when saving a report as PDF {{Templink35SP1|60_0190}}
*Added a default file name when saving a report as PDF {{Templink35SP1|60_0190}}
*- {{Templink35SP1|60_0191}}
{{Templink35SP1|60_0187}}{{Templink35SP1|60_0191}}{{Templink35SP1|60_0192}}
*- {{Templink35SP1|60_0192}}


===HYBRID===
===ZVI===
*Changed report layout for wind cost model {{Templink35SP1|63_0146}}
*Fixed issue in Radar Object where the user-defined Z value would be overridden by the TIN, even if TIN was deselected. {{Templink35SP1|08_0054}}
*Fixed an error in the hourly minimum demand power values in report {{Templink35SP1|63_0148}}
*The Radar altitude is now printed in the report {{Templink35SP1|08_0056}}
*Fixed typo {{Templink35SP1|63_0149}}
 
===MISCELLANEOUS===
The latest version of windPRO can always be downloaded here: https://www.emd.dk/windpro/downloads/
*STATGEN: Fixed issue with an error message "meteo object must be inside the CFD result area" by STATGEN calculation with WAsP CFD. {{Templink35SP1|02_0271}}
*Optimize: It is no longer required to have a MODEL license to use the optimizer {{Templink35SP1|15_0236}}
*Technical: Added shortcuts for Calculation tester, WAsPResCalc and EMDPlayer {{Templink35SP1|21_0206}}
*Solar PV: Fixed error where the total design area would not be the sum of all areas, but instead just the size of the last area {{Templink35SP1|58_0255}}
*Performance Check: Fixed a typo in "User Error code setup" {{Templink35SP1|33_0648}}
*Performance Check: Added ability to view Load/Review tab for the "Error codes in time series" concept {{Templink35SP1|33_0650}}
 
Awaiting test:
*PARK Fixed issue where the "Edit WAsP parameters" button in scaler setup would not turn yellow {{Templink35SP1|04_0790}}
*SICOM <span style="color:#FF0000">Missing description</span> {{Templink35SP1|29_0413}}

Latest revision as of 10:28, 14 January 2022

Below you will find a list of all issues fixed in Service Pack 1:

This Service Pack contains corrections to bugs and comments reported by users. Thanks to all for submitting feedback.

BASIS

  • Solved problem that TIN calculation during calculations can be very slow if the calculation area is not covered completely with elevation data.
  • If the computer loses the connection to a network drive so a .wpo cannot be found, windPRO will no longer overwrite it with an empty file once connection is re-established.
  • Loading a window layout from before version 3.1 no longer gives an exception
  • Fixed issue where multi-editing Shadow receptors would not properly save changes for receptor's slope
  • Fixed issue where importing coordinates from a GPX file would not allow deleting individual points
  • Fixed issue where having many World file background maps some parts would not be rendered
  • Fixed issue which prohibited adding some external WMS map servers
  • Added ability to export Area polygons as .grd files
  • Updated information in About window
  • Changed Help link to point to EMD support page
  • Added shortcuts for Calculation tester, WAsPResCalc and EMDPlayer in start menu


DECIBEL

  • Fixed error where Ground attenuation would be initialized incorrectly for "Danish Codes"-model
  • Fixed error in calculation of Danish 1991 (BEK 304) noise code
  • Fixed issue when running Finnish noise model in combination with a mix of turbines using both PowerMatrix and Power/Noise pairs
  • German Interimsverfahren now uses emission side uncertainty by default
  • Added option to not show NSA-wise uncertainty on main report

HYBRID

  • Fixed an error in the hourly minimum demand power values in report
  • Changed report layout for wind cost model
  • Fixed typo

LOSS & UNCERTAINTY

  • Fixed error which underestimated curtailment losses when a huge amount of curtailment conditions per WTG were defined. If you think that this could have a significant impact on your project, make sure to recalculate losses in Loss & Uncertainty.
  • Fixed issue by copy-pasting of curtailments


MCP

  • Fixed issue where the Measure tab would not calculate correlation (r) values if miniscule time shifts were present.
  • Fixed misspelling in Session report
  • Updated the mouseover hint next to "Show with residuals" to reflect the changes made between version 3.4 and 3.5

METEO

  • Fixed error in correction for magnetic declination: if magnetic declination correction has been used, we recommend applying the new correction and update relevant calculations
  • Fixed issues related to re-loading data after changes made in recalibration table
  • Fixed issue about handling of empty cells in calibration factors.
  • Fixed issues in the presentation of the (re)calibration table
  • Fixed issue in calibration table occurring in the case of several import filters and several calibration periods defined manually: the factor corrections are now applied to the defined calibration period independently of the import filter. We recommend reloading the data if relevant.
  • Fixed issues about the path to imported meteo data file (from file export or .wpobject export, including case with file mask)
  • Fixed issue about creating synthesized heights of imported time series
  • Fixed issue when clicking "Clear and load all" for >30 heights

PARK

  • Fixed error with wrong sign being used when defining asymmetrical no-RIX correction intervals
  • Fixed issue where a warning message would sometimes not be shown when the selected temperature signal for curtailment evaluation had low availability
  • Fixed issue where having too many curtailment criteria, the result-table in the report Production analysis would sometimes be hidden behind the charts.
  • Fixed issue where the "Edit WAsP parameters" button in scaler setup would not turn yellow
  • Fixed annoyance where various window labels would say "CFD area" or "WAsP", when using a .flowres file
  • Fixed typo for reference of Forsting's paper on blockage. The reference year has been corrected to 2017
  • Updated link to blockage description at main tab

Performance Check

  • Fixed a typo in "User Error code setup"
  • Added ability to view Load/Review tab for the "Error codes in time series" concept

PHOTOMONTAGE

  • Fixed problem that Photomontage window sometimes freezes for short periods
  • Fixed problem with Auto Adjust feature

RESOURCE

  • RESOURCE no longer ask for coordinate system after rescaling
  • Fixed issue with an error message in STATGEN "meteo object must be inside the CFD result area" by STATGEN calculation with WAsP CFD.
  • A few bug-fixes in Resource-maps calibrations

SITE COMPLIANCE

  • Fixed issue with incorrect WTG type in Details & assumptions report.
  • Fixed issue with TI values displayed as zero when using GASP data
  • When using siteres: Other checks Earthquake and Lightning rate are now enabled pr default. Temperature check disabled
  • Hint added for reloading siteres files after changing design class or IEC edition
  • Changed description for frequency table based Meteo data
  • Weibull fit for extreme cases has been made very robust. Should erroneous cases occur sector weight is set to zero.
  • Updated link for lightning map

SHADOW

  • Fixes issue where saving time series as result to file with many receptors could cause an exception
  • Fixed issue where calculating SHADOW and deactivating line of sight could cause an exception
  • Defining the lower left (C) coordinate of a window now result in the same coordinates as defining lower right (D) with the calculated coordinates from C
  • Worst case WTG results now only appear on report if worst case calculation is selected in calculation properties

SketchUp Integration tool

  • Fixed bug where the export would fail if exporting both "all visible objects" and "all selected objects" at the same time
  • Fixed bug where selecting to export a wtg with a user-defined rotor angle would anyway be exported with a random rotor angle
  • Fixed issue that SketchUp would not load after saving project to new folder.
  • Small visual fix in CFD export window
  • The wtg direction can now be entered

SOLAR PV

  • Fixed error where the total design area would not be the sum of all areas, but instead just the size of the last area

TR10

  • Fixed error with incorrect gap-filling of production time series
  • Fixed issue where windPRO could get stuck when using the feature "separate error codes"
  • Fix in the correlation formula in the detailed method.
  • Added a default file name when saving a report as PDF


ZVI

  • Fixed issue in Radar Object where the user-defined Z value would be overridden by the TIN, even if TIN was deselected.
  • The Radar altitude is now printed in the report


The latest version of windPRO can always be downloaded here: https://www.emd.dk/windpro/downloads/

This category currently contains no pages or media.

Retrieved from "http://help.emd.dk/mediawiki/index.php?title=Category:WindPRO_3.5_Service_Pack_1&oldid=13993"