NCEP / NCAR Global Reanalysis Data

From Wiki-WindPRO
Jump to navigation Jump to search
NCEP/NCAR Global Reanalysis Data Nodes:
Left = Nodes Covering Western Europe. Right = Nodes Covering France.

Data from the NCEP/NCAR reanalysis project is currently available to users of WindPRO as part of the on-line services from the EMD server. A connection to the internet is thus required. Users may download updated data from the present moment (typically the preceding month) back until 1948.

The sub-set of the NCEP/NCAR Global Reanalysis Data that we hold at EMD is updated on a monthly to bi-monthly update cycle.

Data Description

The NCEP/NCAR model dataset is immense, containing a very wide range of descriptive atmospheric model data. The actual measured climate data sources used in the global reanalysis model are:

  • Upperair rawinsonde observations of temperature, horizontal wind, and specific humidity (i.e. weather balloons)
  • Operational Television Infrared Observation Satellite (TIROS) Operational Vertical Sounder (TOVS) vertical temperature soundings from NOAA polar orbiters over ocean, with microwave retrievals excluded between 20°N and 20°S due to rain contamination
  • TOVS temperature soundings over land only above 100 hPa
  • Cloud-tracked winds from geostationary satellites
  • Aircraft observations of wind and temperature
  • Land surface reports of surface pressure
  • Oceanic reports of surface pressure, temperature, horizontal wind, and specific humidity

These data are used as input into a frozen global assimilation system and processed by a spectral model in order to provide the model output of the variables in the grid.

NCEP/NCAR Global Reanalysis Dataset at EMD

Currently, two types of NCEP/NCAR modeled wind data are available from the EMD server. Both types of data are distributed through the NCAR_Basic dataset from the EMD server. The raw data are processed by EMD as the original data holds the vector components for the wind speeds only (U and V – winds). We convert the raw data into a format appropriate for use with wind turbine applications, i.e. wind speed and direction instead.

Table: Surface Data
Name Description
Abbreviation srf
External URL http://www.cdc.noaa.gov/cdc/data.ncep.reanalysis.surface.html
Data valid at time Instantaneous values at the reference time
Referred to as “Wind" at level "sig995" under main title "Surface"
Level 99.5% of surface pressure
(approximately 42m a.g.l. for standard atmosphere conditions)
Grid 2.5 degree latitude x 2.5 degree longitude global grid (144x73)
Coverage Global
Columns in data-file srf.dir.2 = Wind Direction at sigma level 0.995, i.e. 42 m a.g.l
srf.wsp.2 = Wind Speed at sigma level 0.995, i.e. 42 m a.g.l
gl.tmp.2 = Temperature at sigma level 0.995, i.e. at 42 m a.g.l
Table: 10 m Data
Name Description
Abbreviation u10
External URL http://www.cdc.noaa.gov/cdc/data.ncep.reanalysis.surfaceflux.html
Data valid at time Forecasts valid 6 hours after the reference time
Referred to as "Wind at 10m" at level: "surface" under main title "Surface Fluxes"
Level 10 m above ground
Grid T62 Gaussian grid with 192x94 points
Coverage Global
Columns in data-file u10.dir.10 = Forecast of Wind Direction at 10 m a.g.l
u10.wsp.10 = Forecast of Wind Direction at 10 m a.g.l

You may learn more about these data by visiting the NCEP / NCAR web site holding the data at the URL http://www.cdc.noaa.gov or by reading the paper Kistler et al. (2001) published in Bulletin of the American Meteorological Society. The paper is available for free at: http://www.atmos.umd.edu/~ekalnay/Kistleretal.pdf).

Although the NCEP/NCAR data are simulations giving the “instantaneous values” every 6 hours, these are based on model simulation and there will be some “smoothening” compared to real measurements. We therefore recommend seeing the data as 10 min average values, although this is not specified as so in the documentation.

Converting Sigma Levels Coordinates into Physical Heights

Many of the NCEP / NCAR datasets are actually (internally) reported using sigma level coordinates. By definition, the sigma coordinate is the pressure at the current vertical level divided by the surface pressure level:

Using the definition above, as well as the US standard atmosphere model - see the WindPRO manual on Air Density Adjustments - it is possible to relate the sigma level coordinate to the physical height (by the assumption of the standard atmosphere parameters). This is shown in the figures below. The 0.995 sigma level coordinate is used in many of the ‘surface’ NCEP/NCAR datasets. This coordinate corresponds to a physical height equal to 42.2 m.

Figure: Transferring Sigma Levels into Physical Heights

Some EMD Experience on Using the NCEP/NCAR Reanalysis Data

For long term correction of local measurements, the 10m forecast data or the surface data give the best correlation. An additional upper air pressure level data set also exists, but has not been distributed via the EMD server. Our experience shows that the pressure level data does not seem to be quite as useful for long term correction purposes, but might be usable as input for meso scale models.

Data seem best applicable in colder climates, where the wind systems mainly are pressure driven at the synoptic scale. In warmer regions (southern Europe and further south), the data does not seem to adequately account for the temperature driven wind systems, and can therefore differ quite much from local measurements – but still reasonable correlations can be found for some regions and by scaling properly, the data might also be useful in these regions.

We recommend using the wind index method when performing long term correction with NCAR data – the frequency and direction distribution are often not good enough to allow the use of the other methods.

Be aware of that the energy level based on only 1 year local data can be as much as 10% off – this is what numerous analyses, mainly in Northern Europe show. Having 3 years of local data the energy level probably will be up to 5% off.

Also be aware of that the source for the NCEP/NCAR data is changing over time, so the older part of the data might be quite poor quality. Therefore we do normally not recommend to use data older than 1960 – and often you might not go further back than 1978.

For Northern Europe, where the wind climate is heavily affected by the North Atlantic Oscillation (NAO Index, see Tim Osborn), you should go back to around 1961 to get a reasonable representative long term data period, holding as well low as high wind climate periods, see figure. Using like 1985-2005 for sure will provide too high long term reference level – if history repeat, but nobody does know how the wind will be the next 20 year!

NAO Index.