Category:WindPRO 4.0 Service Pack 2: Difference between revisions

From Wiki-WindPRO
Jump to navigation Jump to search
No edit summary
No edit summary
Line 10: Line 10:


==BASIS==
==BASIS==
*Fixed issue where importing WRF layers from windPROSPECTING would not work {{Templink40SP2|01_2982}}
*Fixed issue where importing WRF layers from windPROSPECTING would not work {{Templink40SP2|01_3546}}
*Copy/paste of power curve data in turbine catalogue will no longer include formatting
*Copy/paste of power curve data in turbine catalogue will no longer include formatting {{Templink40SP2|19_0008}}
*Added option in WTG and Reference tabs to apply the User label as ID
*Added option in WTG and Reference tabs to apply the User label as ID {{Templink40SP2|01_3553}}
*Fixed typo in report where "vertical" was swapped with "horisontal"
*Fixed typo in report where "vertical" was swapped with "horisontal" {{Templink40SP2|01_3566}}
*Fixed issue where the report would always print UTM WGS84 instead of the project coordinate system
*Fixed issue where the report would always print UTM WGS84 instead of the project coordinate system {{Templink40SP2|01_3575}}
*Fixed error where WTGs with too low HH would appear in the "allowed" column
*Fixed error where WTGs with too low HH would appear in the "allowed" column {{Templink40SP2|01_3580}}
*Improved error message when measurement heights were missing
*Improved error message when measurement heights were missing {{Templink40SP2|01_3552}}
 


==DECIBEL==
==DECIBEL==
*Fixed issue with conversion of noise data from 10m to HH for turbines with binned curtailments {{Templink40SP2|06_0479}}
*Added a checkbox for deactivation of the additional result table in "DECIBEL, detailed results graphic" in the report properties {{Templink40SP2|06_0481}}
*Fixed issue where a WTG with PowerMatrix could not be used in when using the setting "Wind speed at 95% of rated power" {{Templink40SP2|06_0486}}
*Fixed display issue in object form for noise results using pseudo wind speeds {{Templink40SP2|06_0487}}{{Templink40SP2|06_0488}}
*Fixed report issue for Finish Low Frequency calculation which could display too many frequencies. Recalculation required {{Templink40SP2|06_0490}}
*Added message dialog if low frequency noise calculation has been configured to calculate "Distance to noise demand" and no turbines exceeded the threshold {{Templink40SP2|06_0492}}
*Fixed window size of NSA setup for German translations {{Templink40SP2|06_0494}}
*Fixed report issue for DECIBEL calculations combining "Highest noise value at receptor" with uncertainty {{Templink40SP2|06_0495}}
*Fixed issue with warning about missing noise data appearing repeatedly for interactive noise line calculations {{Templink40SP2|06_0496}}
*Fixed issue with the reset of the "Use default value from calculation" and "Use default uncertainty margin from model" in the NSA object. Pure tone penalty setup deactivated in NSA, when calculating with German propagation model. {{Templink40SP2|06_0498}}
*Increased the minimum height of the DECIBEL window {{Templink40SP2|06_0500}}


==LOSS & UNCERTAINTY==
==LOSS & UNCERTAINTY==
*Fixed issue with "wrong format" warning when copy pasting curtailment setup. {{Templink40SP2|27_0232}}


==METEO==
==METEO==
*Fixed issues with calibration setup for Ammonit logger files {{Templink40SP2|25_0924}}
*Fixed issue with calculation of magnetic declination {{Templink40SP2|25_0931}}
*Fixed issue where the Meteo object would throw an irregular error message {{Templink40SP2|25_0936}}
*Heights are now always displayed with 2 decimals {{Templink40SP2|25_0942}}
*Added ability to load data from the future {{Templink40SP2|25_0943}}
*Fixed issue where importing only electricity prices would throw a false warning {{Templink40SP2|25_0946}}
*'''@ TJ''' {{Templink40SP2|25_0949}}
*'''@ TGS''' {{Templink40SP2|26_0188}}
Fixed issue where entering a very large number (e.g. 999999) for "Days in window" would throw an exception {{Templink40SP2|26_0194}}
==MODEL==
Slightly improved handling of Socket Error exception. Final solution has not been found.


==NORD2000==
==NORD2000==
*'''@ TJ''' {{Templink40SP2|28_0142}}
*Fixed issue in main result report which could occur if "Always accepted" sound level exceeded ambient noise {{Templink40SP2|28_0144}}
*Fixed issue with reports for calculations which include ambient noise {{Templink40SP2|28_0146}}
{{Templink40SP2|28_0147}}


==ONLINE DATA==
==ONLINE DATA==
*'''@ TGS''' {{Templink40SP2|22_0294}}


==PARK==
==PARK==
*Fixed issue with incorrect GROSS AEP in the report of time based PARK calculation, when more curtailments per time stamp was active. {{Templink40SP2|04_0961}}
*Fixed issue where entering the same value in "From" and "To" in the Displacement Height Calculator would produce 0-values {{Templink40SP2|04_0963}}
*Fixed issue where running a timevarying PARK calculation on a virtual machine with 2 cores would thrown an error message {{Templink40SP2|04_0965}}
*Fixed issue in IEC power curve correction where rated power would not be detected for certain power curves with high-wind ramp-down {{Templink40SP2|04_0969}}
*Added ability to see user label when selecting WTGs to include in report/ result to file {{Templink40SP2|04_0970}}


==PERFORMANCE CHECK==
==PERFORMANCE CHECK==
*Post Construction and Model Validation concepts will now fill gaps if missing data is detected {{Templink40SP2|33_0742}}
*Fixed issue with wind speed substitution if Performance Check was closed efter calculating correlations {{Templink40SP2|33_0744}}
*Added ability to create a meteo object for each turbine in the Performance Check profile with a "Select all"/"Deselect all" option {{Templink40SP2|33_0745}}
*Fixed issue where the source information of wind energy index would disappear after export {{Templink40SP2|33_0747}}
*Fixed error with exception during the conversion of status logs in 10-min time series. {{Templink40SP2|33_0748}}
*Added warning if no power curves are detected in WTG-Objects {{Templink40SP2|33_0749}}


==RESOURCE==
==RESOURCE==
*'''@ TGS''' {{Templink40SP2|05_0135}}


==SCRIPTING==
==SCRIPTING==
*Added properties in Sitedataobject {{Templink40SP2|61_0145}}
*Fixed issue where it was not possible to run a PARK calculation with turbines with curtailment {{Templink40SP2|61_0149}}


==SHADOW==
==SHADOW==
 
*Fixed issue with order of shadow receptors in report if one or more receptors had curtailments {{Templink40SP2|07_0255}}
*Added note to report for map with max hours/d in real case {{Templink40SP2|07_0258}}
*Added option to choose between real case reduction for receptors based on monthly or yearly aggregation {{Templink40SP2|07_0260}}


==SITE COMPLIANCE==
==SITE COMPLIANCE==
*'''@ TGS''' {{Templink40SP2|29_0486}}


==TR10==
==TR10==
Fixed issue with manually entered scaling factors {{Templink40SP2|60_0264}}

Revision as of 13:15, 12 March 2024

January 2024, build 4.0.531

Below you will find a list of all issues fixed in Service Pack 2

This Service Pack contains corrections to bugs and comments reported by users. Thanks to all for submitting feedback.

See list of previous releases here: windPRO releases

The items below are ordered alphabetically by module, then by importance.

BASIS


DECIBEL

  • Fixed issue with conversion of noise data from 10m to HH for turbines with binned curtailments Go to TD in Story Manager
  • Added a checkbox for deactivation of the additional result table in "DECIBEL, detailed results graphic" in the report properties Go to TD in Story Manager
  • Fixed issue where a WTG with PowerMatrix could not be used in when using the setting "Wind speed at 95% of rated power" Go to TD in Story Manager
  • Fixed display issue in object form for noise results using pseudo wind speeds Go to TD in Story Manager Go to TD in Story Manager
  • Fixed report issue for Finish Low Frequency calculation which could display too many frequencies. Recalculation required Go to TD in Story Manager
  • Added message dialog if low frequency noise calculation has been configured to calculate "Distance to noise demand" and no turbines exceeded the threshold Go to TD in Story Manager
  • Fixed window size of NSA setup for German translations Go to TD in Story Manager
  • Fixed report issue for DECIBEL calculations combining "Highest noise value at receptor" with uncertainty Go to TD in Story Manager
  • Fixed issue with warning about missing noise data appearing repeatedly for interactive noise line calculations Go to TD in Story Manager
  • Fixed issue with the reset of the "Use default value from calculation" and "Use default uncertainty margin from model" in the NSA object. Pure tone penalty setup deactivated in NSA, when calculating with German propagation model. Go to TD in Story Manager
  • Increased the minimum height of the DECIBEL window Go to TD in Story Manager


LOSS & UNCERTAINTY

METEO

Fixed issue where entering a very large number (e.g. 999999) for "Days in window" would throw an exception Go to TD in Story Manager

MODEL

Slightly improved handling of Socket Error exception. Final solution has not been found.

NORD2000

Go to TD in Story Manager

ONLINE DATA

PARK

  • Fixed issue with incorrect GROSS AEP in the report of time based PARK calculation, when more curtailments per time stamp was active. Go to TD in Story Manager
  • Fixed issue where entering the same value in "From" and "To" in the Displacement Height Calculator would produce 0-values Go to TD in Story Manager
  • Fixed issue where running a timevarying PARK calculation on a virtual machine with 2 cores would thrown an error message Go to TD in Story Manager
  • Fixed issue in IEC power curve correction where rated power would not be detected for certain power curves with high-wind ramp-down Go to TD in Story Manager
  • Added ability to see user label when selecting WTGs to include in report/ result to file Go to TD in Story Manager

PERFORMANCE CHECK

RESOURCE

SCRIPTING

SHADOW

SITE COMPLIANCE

TR10

Fixed issue with manually entered scaling factors Go to TD in Story Manager

This category currently contains no pages or media.

Retrieved from "http://help.emd.dk/mediawiki/index.php?title=Category:WindPRO_4.0_Service_Pack_2&oldid=16878"