EMD-WRF Europe+ (ERA5)

This page will hold the EMD-WRF Europe+ Mesoscale Data Set Description

EMD-WRF Europe+ Domain

Dataset Parameters

A large quantity of useful parameters are available directly in windPRO to aid in your analysis. The different parameters in the EMD-WRF Europe+ dataset that are available from within windPRO are shown in the table below.

Table: Overview of EMD-WRF Europe+ Dataset Parameters (3 km grid).

Parameter	Unit	Description	Type
time		UTC time stamp
wSpeed.x	m/s	Wind speeds at different heights above ground (x). Heights (x): 10,25,50,75,100,150,200,300,400,500,750,1000,4000m	Instantaneous
wDir.x	deg	Wind directions at different heights above ground (x). Heights (x): 10,25,50,75,100,150,200,300,400,500,750,1000,4000m	Instantaneous
sqrtTKE.x	m/s	Wind speed given as standard deviation in m/s. Derived from the turbulent kinetic energy (TKE) at different heights above ground (x). Heights (x): 10,25,50,75,100,150,200,300,400,500,750,1000,4000m	Instantaneous
press.x	Pa	Pressure at different heights above ground (x). Heights (x): 10,25,50,75,100,150,200,300,400,500,750,1000,4000m	Instantaneous
temp.x	celcius	Temperature at different heights above ground (x). Heights (x): 10,25,50,75,100,150,200,300,400,500,750,1000,4000m	Instantaneous
rh.x	%	Relative humidity at different heights above ground (x). Heights (x): 10,25,50,75,100,150,200,300,400,500,750,1000,4000m	Instantaneous
cloudWater.x	kg/kg	Cloud water content at different heights above ground (x). Heights (x): 10,25,50,75,100,150,200,300,400,500,750,1000,4000m	Instantaneous
cloudIce.x	kg/m^2	Cloud icing content at different heights above ground (x). Heights (x): 10,25,50,75,100,150,200,300,400,500,750,1000,4000m	Instantaneous
psfc	Pa	Pressure at site	Instantaneous
msl	Pa	Pressure at mean sea level	Instantaneous
wSpeed.850hpa	m/s	Wind speeds at pressure level 850hPa.	Instantaneous
wDir.850hpa	deg	Wind speeds at pressure levels 850hPa.	Instantaneous
temperature.2	celcius	Temperatures at 2m	Instantaneous
waterTemp	celcius	Water temperature	Instantaneous
soilTemp.0-10cm	celcius	The temperature in the upper 10 cm of the soil	Instantaneous
relHumidity.2	%	Relative humidity in height 2m above ground level	Instantaneous
snowDepth	m	Show depth (if present)	Instantaneous
vis.s	m	Visibility at surface	Instantaneous
sensHeatFlux.s	w/m2	Sensible Heat Flux at surface	Instantaneous
totPrecip.s	kg/m^2/s	Total Precipitation at surface	1h Average
downShortWaveFlux.s	w/m2	Downward shortwave irradiance at surface	1h Average
swdDir.s	w/m2	Direct shortwave irradiance at surface	1h Average
swdDif.s	w/m2	Diffuse shortwave irradiance at surface	1h Average
cloudBottom	m	Height of cloud bottom	Instantaneous
cloudTop	m	Height of cloud top	Instantaneous
totalCloudCover.a	%	Total cloud cover in atmosphere	1h Average
convCloudCover.a	%	Convective cloud cover in atmosphere	1h Average
rmol	1/m	Inverse Monin-Obukhov-Length
znt	m	Rougnhess length	Instantaneous
u*	m/s	U-start (friction velocity)	Instantaneous
pblh	m	Height of the PBL boundary layer	Instantaneous

Required Modules/Licenses

To access the EMD-WRF Europe+ mesoscale data the following licenses/modules are required in your windPRO setup:

• Basis
• METEO
• EMD-WRF Europe+

When the license fee is paid, you then have access to the full dataset without further cost. The price is available from the price-list on the EMD-homepage. Downloading of data is unrestricted for licenced users, however, a "fair use" policy applies. Unlicenced users may download three months of data from any point, however, multiple downloads are not allowed from the same point.

Visit EMD online ordering to purchase the needed licences.

Validation

The model-setup has been rigorously validated through various internal investigations on more than 300 high-quality meteorological masts spatially distributed in the modelling area. The performance statistics are summarized on the second-page of the datasheet (see this pdf-file) - here.

In addition to the EMD-validations, the EMD-WRF modelling setup has been evaluated in a number of external benchmarks. We have a separate EMD-WRF Benchmark Wiki-Page that holds links to those investigations.

Acknowledgement

• Model development and integration of this dataset into EMD services - was co-supported through the WindPROSPER project. The windPROSPER project is co-funded by the Danish Innovation Fund and the EuroStars framework programme.

External Links

• WindPROSPER at Eurostars
• Innovation Fund Denmark - https://innovationsfonden.dk