Difference between revisions of "Category:WindPRO 3.5 Service Pack 1"
Jump to navigation
Jump to search
Line 2: | Line 2: | ||
This Service Pack contains corrections to bugs reported by users. Thanks to all for submitting feedback. | This Service Pack contains corrections to bugs reported by users. Thanks to all for submitting feedback. | ||
+ | |||
===BASIS=== | ===BASIS=== | ||
− | *test{{Templink35SP1| | + | *Changed Help link to point to EMD support page {{Templink35SP1|01_2890}} |
+ | *Solved problem that TIN calculation during calculations can be very slow if the calculation area is not covered completely with elevation data. {{Templink35SP1|01_2901}} | ||
+ | *- {{Templink35SP1|01_2903}} | ||
+ | *Added ability to export Area polygons as .grd files {{Templink35SP1|01_2905}} | ||
+ | *Fixed problem that Photomontage window sometimes freezes for short periods {{Templink35SP1|01_2908}} | ||
+ | *Loading a window layout from before version 3.1 no longer gives an exception {{Templink35SP1|01_2921}} | ||
+ | *Fixed issue where importing coordinates from a GPX file would not allow deleting individual points {{Templink35SP1|01_2926}} | ||
+ | *If the computer loses the connection to a network drive so a .wpo cannot be found, windPRO will no longer overwrite it with an empty file once connection is re-established. {{Templink35SP1|01_2935}} | ||
+ | *Fixed issue where multi-editing Shadow receptors would not properly save changes for receptor's slope {{Templink35SP1|01_2945}} | ||
+ | *Fixed issue where having many World file background maps some parts would not be rendered {{Templink35SP1|01_2954}} | ||
+ | *Updated information in About window {{Templink35SP1|01_2955}} | ||
+ | *Fixed issue which prohibited adding some external WMS map servers {{Templink35SP1|01_2957}} | ||
+ | *- {{Templink35SP1|01_2959}} | ||
+ | |||
+ | ===MCP=== | ||
+ | *Fixed issue where the Measure tab would not calculate correlation (r) values if miniscule time shifts were present. {{Templink35SP1|03_0198}} | ||
+ | *Fixed misspelling in Session report {{Templink35SP1|03_0200}} | ||
+ | *Updated the mouseover hint next to "Show with residuals" to reflect the changes made between version 3.4 and 3.5 {{Templink35SP1|03_0202}} | ||
+ | |||
+ | ===PARK=== | ||
+ | *Fixed annoyance where various window labels would say "CFD area" or "WAsP", when using a .flowres file {{Templink35SP1|04_0764}} | ||
+ | *Fixed issue where having too many curtailment criteria, the result-table in the report Production analysis would sometimes be hidden behind the charts. {{Templink35SP1|04_0771}} | ||
+ | *Fixed error with wrong sign being used when defining asymmetrical no-RIX correction intervals {{Templink35SP1|04_0773}} | ||
+ | *Updated link to blockage description at main tab {{Templink35SP1|04_0778}} | ||
+ | *Fixed issue where a warning message would sometimes not be shown when the selected temperature signal for curtailment evaluation had low availability {{Templink35SP1|04_0781}} | ||
+ | *Fixed typo for reference of Forsting's paper on blockage. The reference year has been corrected to 2017 {{Templink35SP1|04_0793}} | ||
+ | |||
+ | ===RESSOURCE=== | ||
+ | *RESOURCE doesn't ask for coordinate system after rescaling any more {{Templink35SP1|05_0094}} | ||
+ | *A few bug-fixes in Resource-maps calibrations {{Templink35SP1|05_0097}} | ||
+ | *A few bug-fixes in Resource-maps calibrations {{Templink35SP1|05_0098}} | ||
+ | *A few bug-fixes in Resource-maps calibrations {{Templink35SP1|05_0099}} | ||
+ | |||
+ | ===DECIBEL=== | ||
+ | *Added option to not show NSA-wise uncertainty on main report {{Templink35SP1|06_0350}} | ||
+ | *German Interimsverfahren now uses emission side uncertainty by default {{Templink35SP1|06_0351}} | ||
+ | *Fixed issue when running Finnish noise model in combination with a mix of turbines using both PowerMatrix and Power/Noise pairs {{Templink35SP1|06_0354}} | ||
+ | *Fixed error where Ground attenuation would be initialized incorrectly for "Danish Codes"-model {{Templink35SP1|06_0359}} | ||
+ | *<span style="color:#FF0000">Missing description</span> {{Templink35SP1|06_0360}} | ||
+ | |||
+ | ===SHADOW=== | ||
+ | *Worst case WTG results now only appear on report if worst case calculation is selected in calculation properties {{Templink35SP1|07_0213}} | ||
+ | *Defining the lower left (C) coordinate of a window now result in the same coordinates as defining lower right (D) with the calculated coordinates from C {{Templink35SP1|07_0214}} | ||
+ | *Fixes issue where saving time series as result to file with many receptors could cause an exception {{Templink35SP1|07_0218}} | ||
+ | *Fixed issue where calculating SHADOW and deactivating line of sight could cause an exception {{Templink35SP1|07_0219}} | ||
+ | |||
+ | ===ZVI=== | ||
+ | *Fixed issue in Radar Object where the user-defined Z value would be overridden by the TIN, even if TIN was deselected. {{Templink35SP1|08_0054}} | ||
+ | *The Radar altitude is now printed in the report {{Templink35SP1|08_0056}} | ||
+ | |||
+ | ===SketchUp Integration tool=== | ||
+ | *Fixed bug where the export would fail if exporting both "all visible objects" and "all selected objects" at the same time {{Templink35SP1|13_0043}} | ||
+ | *Fixed bug where selecting to export a wtg with a user-defined rotor angle would anyway be exported with a random rotor angle {{Templink35SP1|13_0046}} | ||
+ | *The wtg direction can now be entered {{Templink35SP1|13_0048}} | ||
+ | *Small visual fix in CFD export window {{Templink35SP1|13_0049}} | ||
+ | *Fixed issue that SketchUp would not load after saving project to new folder. {{Templink35SP1|13_0050}} | ||
+ | |||
+ | ===METEO=== | ||
+ | *Fixed issue where Meteo object .wpobject exports which referred to folders with a file mask would be saved in the project folder after re-imported, instead of the original file mask location {{Templink35SP1|25_0751}} | ||
+ | *Fixed issue where merging two recalibration lines would sometimes be split again after closing and reopening the object {{Templink35SP1|25_0754}} | ||
+ | *<span style="color:#FF0000">Missing description</span> {{Templink35SP1|25_0757}} | ||
+ | *When unpacking a project export, Meteo data now points to the relative path of the current project location, instead of the original absolute path from where the project was exported from. {{Templink35SP1|25_0760}} | ||
+ | *Fixed issue in Recalibration, where empty, 0 or 1 values for scale and offset would not be correctly handled {{Templink35SP1|25_0761}} | ||
+ | *<span style="color:#FF0000">Missing description</span> {{Templink35SP1|25_0762}} | ||
+ | *Fixed issue where right clicking an averaged sample in a gun shot graph could cause an exception {{Templink35SP1|25_0763}} | ||
+ | *Fixed issue when clicking "Clear and load all" for >30 heights {{Templink35SP1|25_0772}} | ||
+ | *Fixed issue where recalibration would not be performed after loading additional data without visiting the Calibration page {{Templink35SP1|25_0773}} | ||
+ | *Fixed error where the resulting correction does not consider any applied magnetic declination {{Templink35SP1|25_0774}} | ||
+ | *<span style="color:#FF0000">Missing description</span> {{Templink35SP1|25_0775}} | ||
+ | *<span style="color:#FF0000">Missing description</span> {{Templink35SP1|25_0777}} | ||
+ | *Fixed error where manually inputting magnetic declination would calculate a wrong resulting calibration {{Templink35SP1|25_0779}} | ||
+ | *Fixed error where calibration would not always include the last sample {{Templink35SP1|25_0781}} | ||
+ | *<span style="color:#FF0000">Missing description</span> {{Templink35SP1|25_0785}} | ||
+ | *Edited help text in "Merge wind speeds from 2 heights" {{Templink35SP1|25_0787}} | ||
+ | *Added message to reload data after changing calibrations {{Templink35SP1|25_0797}} | ||
+ | *Added ability to create a calibration period per import filter {{Templink35SP1|25_0801}} | ||
+ | *Fixed issue where all the min/max columns in the RSD verification tool were swapped {{Templink35SP1|26_0156}} | ||
+ | |||
+ | ===LOSS & UNCERTAINTY=== | ||
+ | *Fixed issue by copy-pasting of curtailments {{Templink35SP1|27_0179}} | ||
+ | *Fixed issue by copy-pasting of curtailments {{Templink35SP1|27_0191}} | ||
+ | *Resolved an issue in LOSS&UNCERTAINTY, which underestimated curtailment losses when a huge amount of curtailment conditions per WTG were defined. {{Templink35SP1|27_0196}} | ||
+ | *- {{Templink35SP1|27_0197}} | ||
+ | *- {{Templink35SP1|27_0198}} | ||
+ | |||
+ | ===SITE COMPLIANCE=== | ||
+ | *Fixed issue with incorrect WTG type in Details & assumptions report. {{Templink35SP1|29_0399}} | ||
+ | *When using siteres: Other checks Earthquake and Lightning rate are now enabled pr default. Temperature check disabled {{Templink35SP1|29_0401}} | ||
+ | *Hint added for reloading siteres files after changing design class or IEC edition {{Templink35SP1|29_0402}} | ||
+ | *Changed description for frequency table based Meteo data {{Templink35SP1|29_0407}} | ||
+ | *Added a warning when using checks based on energy weighted values, but there are sectors without energy. {{Templink35SP1|29_0409}} | ||
+ | *Updated link for lightning map {{Templink35SP1|29_0411}} | ||
+ | |||
+ | ===TR10=== | ||
+ | *Fixed error with incorrect gap-filling of production time series {{Templink35SP1|60_0185}} | ||
+ | *Fixed issue where windPRO could get stuck when using the feature "separate error codes" {{Templink35SP1|60_0186}} | ||
+ | *- {{Templink35SP1|60_0187}} | ||
+ | *Fix in the correlation formula in the detailed method. {{Templink35SP1|60_0189}} | ||
+ | *Added a default file name when saving a report as PDF {{Templink35SP1|60_0190}} | ||
+ | *- {{Templink35SP1|60_0191}} | ||
+ | *- {{Templink35SP1|60_0192}} | ||
+ | |||
+ | ===HYBRID=== | ||
+ | *Changed report layout for wind cost model {{Templink35SP1|63_0146}} | ||
+ | *Fixed an error in the hourly minimum demand power values in report {{Templink35SP1|63_0148}} | ||
+ | *Fixed typo {{Templink35SP1|63_0149}} | ||
+ | |||
+ | ===MISCELLANEOUS=== | ||
+ | *STATGEN: Fixed issue with an error message "meteo object must be inside the CFD result area" by STATGEN calculation with WAsP CFD. {{Templink35SP1|02_0271}} | ||
+ | *Optimize: It is no longer required to have a MODEL license to use the optimizer {{Templink35SP1|15_0236}} | ||
+ | *Technical: Added shortcuts for Calculation tester, WAsPResCalc and EMDPlayer {{Templink35SP1|21_0206}} | ||
+ | *Solar PV: Fixed error where the total design area would not be the sum of all areas, but instead just the size of the last area {{Templink35SP1|58_0255}} | ||
+ | *Performance Check: Fixed a typo in "User Error code setup" {{Templink35SP1|33_0648}} | ||
+ | *Performance Check: Added ability to view Load/Review tab for the "Error codes in time series" concept {{Templink35SP1|33_0650}} | ||
+ | |||
+ | Awaiting test: | ||
+ | *PARK Fixed issue where the "Edit WAsP parameters" button in scaler setup would not turn yellow {{Templink35SP1|04_0790}} | ||
+ | *SICOM <span style="color:#FF0000">Missing description</span> {{Templink35SP1|29_0413}} |
Revision as of 15:34, 10 January 2022
Below you will find a list of all issues fixed in Service Pack 1:
This Service Pack contains corrections to bugs reported by users. Thanks to all for submitting feedback.
BASIS
- Changed Help link to point to EMD support page
- Solved problem that TIN calculation during calculations can be very slow if the calculation area is not covered completely with elevation data.
- -
- Added ability to export Area polygons as .grd files
- Fixed problem that Photomontage window sometimes freezes for short periods
- Loading a window layout from before version 3.1 no longer gives an exception
- Fixed issue where importing coordinates from a GPX file would not allow deleting individual points
- If the computer loses the connection to a network drive so a .wpo cannot be found, windPRO will no longer overwrite it with an empty file once connection is re-established.
- Fixed issue where multi-editing Shadow receptors would not properly save changes for receptor's slope
- Fixed issue where having many World file background maps some parts would not be rendered
- Updated information in About window
- Fixed issue which prohibited adding some external WMS map servers
- -
MCP
- Fixed issue where the Measure tab would not calculate correlation (r) values if miniscule time shifts were present.
- Fixed misspelling in Session report
- Updated the mouseover hint next to "Show with residuals" to reflect the changes made between version 3.4 and 3.5
PARK
- Fixed annoyance where various window labels would say "CFD area" or "WAsP", when using a .flowres file
- Fixed issue where having too many curtailment criteria, the result-table in the report Production analysis would sometimes be hidden behind the charts.
- Fixed error with wrong sign being used when defining asymmetrical no-RIX correction intervals
- Updated link to blockage description at main tab
- Fixed issue where a warning message would sometimes not be shown when the selected temperature signal for curtailment evaluation had low availability
- Fixed typo for reference of Forsting's paper on blockage. The reference year has been corrected to 2017
RESSOURCE
- RESOURCE doesn't ask for coordinate system after rescaling any more
- A few bug-fixes in Resource-maps calibrations
- A few bug-fixes in Resource-maps calibrations
- A few bug-fixes in Resource-maps calibrations
DECIBEL
- Added option to not show NSA-wise uncertainty on main report
- German Interimsverfahren now uses emission side uncertainty by default
- Fixed issue when running Finnish noise model in combination with a mix of turbines using both PowerMatrix and Power/Noise pairs
- Fixed error where Ground attenuation would be initialized incorrectly for "Danish Codes"-model
- Missing description
SHADOW
- Worst case WTG results now only appear on report if worst case calculation is selected in calculation properties
- Defining the lower left (C) coordinate of a window now result in the same coordinates as defining lower right (D) with the calculated coordinates from C
- Fixes issue where saving time series as result to file with many receptors could cause an exception
- Fixed issue where calculating SHADOW and deactivating line of sight could cause an exception
ZVI
- Fixed issue in Radar Object where the user-defined Z value would be overridden by the TIN, even if TIN was deselected.
- The Radar altitude is now printed in the report
SketchUp Integration tool
- Fixed bug where the export would fail if exporting both "all visible objects" and "all selected objects" at the same time
- Fixed bug where selecting to export a wtg with a user-defined rotor angle would anyway be exported with a random rotor angle
- The wtg direction can now be entered
- Small visual fix in CFD export window
- Fixed issue that SketchUp would not load after saving project to new folder.
METEO
- Fixed issue where Meteo object .wpobject exports which referred to folders with a file mask would be saved in the project folder after re-imported, instead of the original file mask location
- Fixed issue where merging two recalibration lines would sometimes be split again after closing and reopening the object
- Missing description
- When unpacking a project export, Meteo data now points to the relative path of the current project location, instead of the original absolute path from where the project was exported from.
- Fixed issue in Recalibration, where empty, 0 or 1 values for scale and offset would not be correctly handled
- Missing description
- Fixed issue where right clicking an averaged sample in a gun shot graph could cause an exception
- Fixed issue when clicking "Clear and load all" for >30 heights
- Fixed issue where recalibration would not be performed after loading additional data without visiting the Calibration page
- Fixed error where the resulting correction does not consider any applied magnetic declination
- Missing description
- Missing description
- Fixed error where manually inputting magnetic declination would calculate a wrong resulting calibration
- Fixed error where calibration would not always include the last sample
- Missing description
- Edited help text in "Merge wind speeds from 2 heights"
- Added message to reload data after changing calibrations
- Added ability to create a calibration period per import filter
- Fixed issue where all the min/max columns in the RSD verification tool were swapped
LOSS & UNCERTAINTY
- Fixed issue by copy-pasting of curtailments
- Fixed issue by copy-pasting of curtailments
- Resolved an issue in LOSS&UNCERTAINTY, which underestimated curtailment losses when a huge amount of curtailment conditions per WTG were defined.
- -
- -
SITE COMPLIANCE
- Fixed issue with incorrect WTG type in Details & assumptions report.
- When using siteres: Other checks Earthquake and Lightning rate are now enabled pr default. Temperature check disabled
- Hint added for reloading siteres files after changing design class or IEC edition
- Changed description for frequency table based Meteo data
- Added a warning when using checks based on energy weighted values, but there are sectors without energy.
- Updated link for lightning map
TR10
- Fixed error with incorrect gap-filling of production time series
- Fixed issue where windPRO could get stuck when using the feature "separate error codes"
- -
- Fix in the correlation formula in the detailed method.
- Added a default file name when saving a report as PDF
- -
- -
HYBRID
- Changed report layout for wind cost model
- Fixed an error in the hourly minimum demand power values in report
- Fixed typo
MISCELLANEOUS
- STATGEN: Fixed issue with an error message "meteo object must be inside the CFD result area" by STATGEN calculation with WAsP CFD.
- Optimize: It is no longer required to have a MODEL license to use the optimizer
- Technical: Added shortcuts for Calculation tester, WAsPResCalc and EMDPlayer
- Solar PV: Fixed error where the total design area would not be the sum of all areas, but instead just the size of the last area
- Performance Check: Fixed a typo in "User Error code setup"
- Performance Check: Added ability to view Load/Review tab for the "Error codes in time series" concept
Awaiting test:
- PARK Fixed issue where the "Edit WAsP parameters" button in scaler setup would not turn yellow
- SICOM Missing description
This category currently contains no pages or media.