Difference between revisions of "Category:WindPRO 3.5 Service Pack 1"

From Wiki-WindPRO
Jump to navigation Jump to search
m
Line 4: Line 4:
  
 
===BASIS===
 
===BASIS===
−
*Changed Help link to point to EMD support page {{Templink35SP1|01_2890}}
 
 
*Solved problem that TIN calculation during calculations can be very slow if the calculation area is not covered completely with elevation data. {{Templink35SP1|01_2901}}
 
*Solved problem that TIN calculation during calculations can be very slow if the calculation area is not covered completely with elevation data. {{Templink35SP1|01_2901}}
−
*- {{Templink35SP1|01_2903}}
+
*If the computer loses the connection to a network drive so a .wpo cannot be found, windPRO will no longer overwrite it with an empty file once connection is re-established. {{Templink35SP1|01_2935}}
−
*Added ability to export Area polygons as .grd files {{Templink35SP1|01_2905}}
 
−
*Fixed problem that Photomontage window sometimes freezes for short periods {{Templink35SP1|01_2908}}
 
 
*Loading a window layout from before version 3.1 no longer gives an exception {{Templink35SP1|01_2921}}
 
*Loading a window layout from before version 3.1 no longer gives an exception {{Templink35SP1|01_2921}}
 
*Fixed issue where importing coordinates from a GPX file would not allow deleting individual points {{Templink35SP1|01_2926}}
 
*Fixed issue where importing coordinates from a GPX file would not allow deleting individual points {{Templink35SP1|01_2926}}
−
*If the computer loses the connection to a network drive so a .wpo cannot be found, windPRO will no longer overwrite it with an empty file once connection is re-established. {{Templink35SP1|01_2935}}
 
 
*Fixed issue where multi-editing Shadow receptors would not properly save changes for receptor's slope {{Templink35SP1|01_2945}}
 
*Fixed issue where multi-editing Shadow receptors would not properly save changes for receptor's slope {{Templink35SP1|01_2945}}
 
*Fixed issue where having many World file background maps some parts would not be rendered {{Templink35SP1|01_2954}}
 
*Fixed issue where having many World file background maps some parts would not be rendered {{Templink35SP1|01_2954}}
 +
*Fixed issue which prohibited adding some external WMS map servers {{Templink35SP1|01_2957}}
 +
*Added ability to export Area polygons as .grd files {{Templink35SP1|01_2905}}
 
*Updated information in About window {{Templink35SP1|01_2955}}
 
*Updated information in About window {{Templink35SP1|01_2955}}
−
*Fixed issue which prohibited adding some external WMS map servers {{Templink35SP1|01_2957}}
+
*Changed Help link to point to EMD support page {{Templink35SP1|01_2890}}
 +
*- {{Templink35SP1|01_2903}}
 
*- {{Templink35SP1|01_2959}}
 
*- {{Templink35SP1|01_2959}}
 
 
Line 24: Line 23:
  
 
===PARK===
 
===PARK===
−
*Fixed annoyance where various window labels would say "CFD area" or "WAsP", when using a .flowres file {{Templink35SP1|04_0764}}
 
−
*Fixed issue where having too many curtailment criteria, the result-table in the report Production analysis would sometimes be hidden behind the charts. {{Templink35SP1|04_0771}}
 
 
*Fixed error with wrong sign being used when defining asymmetrical no-RIX correction intervals {{Templink35SP1|04_0773}}
 
*Fixed error with wrong sign being used when defining asymmetrical no-RIX correction intervals {{Templink35SP1|04_0773}}
−
*Updated link to blockage description at main tab {{Templink35SP1|04_0778}}
 
 
*Fixed issue where a warning message would sometimes not be shown when the selected temperature signal for curtailment evaluation had low availability {{Templink35SP1|04_0781}}
 
*Fixed issue where a warning message would sometimes not be shown when the selected temperature signal for curtailment evaluation had low availability {{Templink35SP1|04_0781}}
 +
*Fixed issue where having too many curtailment criteria, the result-table in the report Production analysis would sometimes be hidden behind the charts. {{Templink35SP1|04_0771}}
 +
*Fixed annoyance where various window labels would say "CFD area" or "WAsP", when using a .flowres file {{Templink35SP1|04_0764}}
 
*Fixed typo for reference of Forsting's paper on blockage. The reference year has been corrected to 2017 {{Templink35SP1|04_0793}}
 
*Fixed typo for reference of Forsting's paper on blockage. The reference year has been corrected to 2017 {{Templink35SP1|04_0793}}
 +
*Updated link to blockage description at main tab {{Templink35SP1|04_0778}}
  
−
===RESSOURCE===
+
===RESOURCE===
−
*RESOURCE doesn't ask for coordinate system after rescaling any more {{Templink35SP1|05_0094}}
+
*RESOURCE no longer ask for coordinate system after rescaling {{Templink35SP1|05_0094}}
 
*A few bug-fixes in Resource-maps calibrations {{Templink35SP1|05_0097}}
 
*A few bug-fixes in Resource-maps calibrations {{Templink35SP1|05_0097}}
 
*A few bug-fixes in Resource-maps calibrations {{Templink35SP1|05_0098}}
 
*A few bug-fixes in Resource-maps calibrations {{Templink35SP1|05_0098}}
Line 38: Line 37:
  
 
===DECIBEL===
 
===DECIBEL===
 +
*Fixed error where Ground attenuation would be initialized incorrectly for "Danish Codes"-model {{Templink35SP1|06_0359}}
 +
*Fixed issue when running Finnish noise model in combination with a mix of turbines using both PowerMatrix and Power/Noise pairs {{Templink35SP1|06_0354}}
 +
*German Interimsverfahren now uses emission side uncertainty by default {{Templink35SP1|06_0351}}
 
*Added option to not show NSA-wise uncertainty on main report {{Templink35SP1|06_0350}}
 
*Added option to not show NSA-wise uncertainty on main report {{Templink35SP1|06_0350}}
−
*German Interimsverfahren now uses emission side uncertainty by default {{Templink35SP1|06_0351}}
 
−
*Fixed issue when running Finnish noise model in combination with a mix of turbines using both PowerMatrix and Power/Noise pairs {{Templink35SP1|06_0354}}
 
−
*Fixed error where Ground attenuation would be initialized incorrectly for "Danish Codes"-model {{Templink35SP1|06_0359}}
 
 
*<span style="color:#FF0000">Missing description</span> {{Templink35SP1|06_0360}}
 
*<span style="color:#FF0000">Missing description</span> {{Templink35SP1|06_0360}}
  
 
===SHADOW===
 
===SHADOW===
−
*Worst case WTG results now only appear on report if worst case calculation is selected in calculation properties {{Templink35SP1|07_0213}}
 
−
*Defining the lower left (C) coordinate of a window now result in the same coordinates as defining lower right (D) with the calculated coordinates from C {{Templink35SP1|07_0214}}
 
 
*Fixes issue where saving time series as result to file with many receptors could cause an exception {{Templink35SP1|07_0218}}
 
*Fixes issue where saving time series as result to file with many receptors could cause an exception {{Templink35SP1|07_0218}}
 
*Fixed issue where calculating SHADOW and deactivating line of sight could cause an exception {{Templink35SP1|07_0219}}
 
*Fixed issue where calculating SHADOW and deactivating line of sight could cause an exception {{Templink35SP1|07_0219}}
 +
*Defining the lower left (C) coordinate of a window now result in the same coordinates as defining lower right (D) with the calculated coordinates from C {{Templink35SP1|07_0214}}
 +
*Worst case WTG results now only appear on report if worst case calculation is selected in calculation properties {{Templink35SP1|07_0213}}
 
 
 
===ZVI===
 
===ZVI===
Line 57: Line 56:
 
*Fixed bug where the export would fail if exporting both "all visible objects" and "all selected objects" at the same time {{Templink35SP1|13_0043}}
 
*Fixed bug where the export would fail if exporting both "all visible objects" and "all selected objects" at the same time {{Templink35SP1|13_0043}}
 
*Fixed bug where selecting to export a wtg with a user-defined rotor angle would anyway be exported with a random rotor angle {{Templink35SP1|13_0046}}
 
*Fixed bug where selecting to export a wtg with a user-defined rotor angle would anyway be exported with a random rotor angle {{Templink35SP1|13_0046}}
 +
*Fixed issue that SketchUp would not load after saving project to new folder. {{Templink35SP1|13_0050}}
 +
*Small visual fix in CFD export window {{Templink35SP1|13_0049}}
 
*The wtg direction can now be entered {{Templink35SP1|13_0048}}
 
*The wtg direction can now be entered {{Templink35SP1|13_0048}}
−
*Small visual fix in CFD export window {{Templink35SP1|13_0049}}
 
−
*Fixed issue that SketchUp would not load after saving project to new folder. {{Templink35SP1|13_0050}}
 
 
 
 
===METEO===
 
===METEO===
 +
*Fixed error where the resulting correction does not consider any applied magnetic declination {{Templink35SP1|25_0774}}
 +
*Fixed error where manually inputting magnetic declination would calculate a wrong resulting calibration {{Templink35SP1|25_0779}}
 +
*Fixed error where calibration would not always include the last sample {{Templink35SP1|25_0781}}
 +
*Fixed issue in Recalibration, where empty, 0 or 1 values for scale and offset would not be correctly handled {{Templink35SP1|25_0761}}
 +
*Fixed issue where merging two recalibration lines would sometimes be split again after closing and reopening the object {{Templink35SP1|25_0754}}
 +
*Fixed issue where recalibration would not be performed after loading additional data without visiting the Calibration page {{Templink35SP1|25_0773}}
 
*Fixed issue where Meteo object .wpobject exports which referred to folders with a file mask would be saved in the project folder after re-imported, instead of the original file mask location {{Templink35SP1|25_0751}}
 
*Fixed issue where Meteo object .wpobject exports which referred to folders with a file mask would be saved in the project folder after re-imported, instead of the original file mask location {{Templink35SP1|25_0751}}
−
*Fixed issue where merging two recalibration lines would sometimes be split again after closing and reopening the object {{Templink35SP1|25_0754}}
+
*Fixed issue where right clicking an averaged sample in a gun shot graph could cause an exception {{Templink35SP1|25_0763}}
−
*<span style="color:#FF0000">Missing description</span> {{Templink35SP1|25_0757}}
+
*Fixed issue when clicking "Clear and load all" for >30 heights {{Templink35SP1|25_0772}}
 +
*Fixed issue where all the min/max columns in the RSD verification tool were swapped {{Templink35SP1|26_0156}}
 +
*Edited help text in "Merge wind speeds from 2 heights" {{Templink35SP1|25_0787}}
 +
*Added message to reload data after changing calibrations {{Templink35SP1|25_0797}}
 +
*Added ability to create a calibration period per import filter {{Templink35SP1|25_0801}}
 
*When unpacking a project export, Meteo data now points to the relative path of the current project location, instead of the original absolute path from where the project was exported from. {{Templink35SP1|25_0760}}
 
*When unpacking a project export, Meteo data now points to the relative path of the current project location, instead of the original absolute path from where the project was exported from. {{Templink35SP1|25_0760}}
−
*Fixed issue in Recalibration, where empty, 0 or 1 values for scale and offset would not be correctly handled {{Templink35SP1|25_0761}}
 
 
*<span style="color:#FF0000">Missing description</span> {{Templink35SP1|25_0762}}
 
*<span style="color:#FF0000">Missing description</span> {{Templink35SP1|25_0762}}
−
*Fixed issue where right clicking an averaged sample in a gun shot graph could cause an exception {{Templink35SP1|25_0763}}
+
*<span style="color:#FF0000">Missing description</span> {{Templink35SP1|25_0757}}
−
*Fixed issue when clicking "Clear and load all" for >30 heights {{Templink35SP1|25_0772}}
 
−
*Fixed issue where recalibration would not be performed after loading additional data without visiting the Calibration page {{Templink35SP1|25_0773}}
 
−
*Fixed error where the resulting correction does not consider any applied magnetic declination {{Templink35SP1|25_0774}}
 
 
*<span style="color:#FF0000">Missing description</span> {{Templink35SP1|25_0775}}
 
*<span style="color:#FF0000">Missing description</span> {{Templink35SP1|25_0775}}
 
*<span style="color:#FF0000">Missing description</span> {{Templink35SP1|25_0777}}
 
*<span style="color:#FF0000">Missing description</span> {{Templink35SP1|25_0777}}
−
*Fixed error where manually inputting magnetic declination would calculate a wrong resulting calibration {{Templink35SP1|25_0779}}
 
−
*Fixed error where calibration would not always include the last sample {{Templink35SP1|25_0781}}
 
 
*<span style="color:#FF0000">Missing description</span> {{Templink35SP1|25_0785}}
 
*<span style="color:#FF0000">Missing description</span> {{Templink35SP1|25_0785}}
−
*Edited help text in "Merge wind speeds from 2 heights" {{Templink35SP1|25_0787}}
 
−
*Added message to reload data after changing calibrations {{Templink35SP1|25_0797}}
 
−
*Added ability to create a calibration period per import filter {{Templink35SP1|25_0801}}
 
−
*Fixed issue where all the min/max columns in the RSD verification tool were swapped {{Templink35SP1|26_0156}}
 
  
 
===LOSS & UNCERTAINTY===
 
===LOSS & UNCERTAINTY===
 +
*Fixed error which underestimated curtailment losses when a huge amount of curtailment conditions per WTG were defined. If you think that this could have a significant impact on your project, make sure to recalculate losses in Loss & Uncertainty. {{Templink35SP1|27_0196}}
 
*Fixed issue by copy-pasting of curtailments {{Templink35SP1|27_0179}}
 
*Fixed issue by copy-pasting of curtailments {{Templink35SP1|27_0179}}
 
*Fixed issue by copy-pasting of curtailments {{Templink35SP1|27_0191}}
 
*Fixed issue by copy-pasting of curtailments {{Templink35SP1|27_0191}}
−
*Resolved an issue in LOSS&UNCERTAINTY, which underestimated curtailment losses when a huge amount of curtailment conditions per WTG were defined. {{Templink35SP1|27_0196}}
 
 
*- {{Templink35SP1|27_0197}}
 
*- {{Templink35SP1|27_0197}}
 
*- {{Templink35SP1|27_0198}}
 
*- {{Templink35SP1|27_0198}}
Line 100: Line 99:
 
*Fixed error with incorrect gap-filling of production time series {{Templink35SP1|60_0185}}
 
*Fixed error with incorrect gap-filling of production time series {{Templink35SP1|60_0185}}
 
*Fixed issue where windPRO could get stuck when using the feature "separate error codes" {{Templink35SP1|60_0186}}
 
*Fixed issue where windPRO could get stuck when using the feature "separate error codes" {{Templink35SP1|60_0186}}
−
*- {{Templink35SP1|60_0187}}
 
 
*Fix in the correlation formula in the detailed method. {{Templink35SP1|60_0189}}
 
*Fix in the correlation formula in the detailed method. {{Templink35SP1|60_0189}}
 
*Added a default file name when saving a report as PDF {{Templink35SP1|60_0190}}
 
*Added a default file name when saving a report as PDF {{Templink35SP1|60_0190}}
 +
*- {{Templink35SP1|60_0187}}
 
*- {{Templink35SP1|60_0191}}
 
*- {{Templink35SP1|60_0191}}
 
*- {{Templink35SP1|60_0192}}
 
*- {{Templink35SP1|60_0192}}
  
 
===HYBRID===
 
===HYBRID===
 +
*Fixed an error in the hourly minimum demand power values in report {{Templink35SP1|63_0148}}
 
*Changed report layout for wind cost model {{Templink35SP1|63_0146}}
 
*Changed report layout for wind cost model {{Templink35SP1|63_0146}}
−
*Fixed an error in the hourly minimum demand power values in report {{Templink35SP1|63_0148}}
 
 
*Fixed typo {{Templink35SP1|63_0149}}
 
*Fixed typo {{Templink35SP1|63_0149}}
  
 
===MISCELLANEOUS===
 
===MISCELLANEOUS===
 +
*Solar PV: Fixed error where the total design area would not be the sum of all areas, but instead just the size of the last area {{Templink35SP1|58_0255}}
 
*STATGEN: Fixed issue with an error message "meteo object must be inside the CFD result area" by STATGEN calculation with WAsP CFD. {{Templink35SP1|02_0271}}
 
*STATGEN: Fixed issue with an error message "meteo object must be inside the CFD result area" by STATGEN calculation with WAsP CFD. {{Templink35SP1|02_0271}}
 
*Optimize: It is no longer required to have a MODEL license to use the optimizer {{Templink35SP1|15_0236}}
 
*Optimize: It is no longer required to have a MODEL license to use the optimizer {{Templink35SP1|15_0236}}
−
*Technical: Added shortcuts for Calculation tester, WAsPResCalc and EMDPlayer {{Templink35SP1|21_0206}}
 
−
*Solar PV: Fixed error where the total design area would not be the sum of all areas, but instead just the size of the last area {{Templink35SP1|58_0255}}
 
 
*Performance Check: Fixed a typo in "User Error code setup" {{Templink35SP1|33_0648}}
 
*Performance Check: Fixed a typo in "User Error code setup" {{Templink35SP1|33_0648}}
 
*Performance Check: Added ability to view Load/Review tab for the "Error codes in time series" concept {{Templink35SP1|33_0650}}
 
*Performance Check: Added ability to view Load/Review tab for the "Error codes in time series" concept {{Templink35SP1|33_0650}}
 +
*PHOTOMONTAGE: Fixed problem that Photomontage window sometimes freezes for short periods {{Templink35SP1|01_2908}}
 +
*Technical: Added shortcuts for Calculation tester, WAsPResCalc and EMDPlayer {{Templink35SP1|21_0206}}
  
 +
 
Awaiting test:
 
Awaiting test:
 
*PARK Fixed issue where the "Edit WAsP parameters" button in scaler setup would not turn yellow {{Templink35SP1|04_0790}}
 
*PARK Fixed issue where the "Edit WAsP parameters" button in scaler setup would not turn yellow {{Templink35SP1|04_0790}}
 
*SICOM <span style="color:#FF0000">Missing description</span> {{Templink35SP1|29_0413}}
 
*SICOM <span style="color:#FF0000">Missing description</span> {{Templink35SP1|29_0413}}

Revision as of 16:01, 10 January 2022

Below you will find a list of all issues fixed in Service Pack 1:

This Service Pack contains corrections to bugs reported by users. Thanks to all for submitting feedback.

BASIS

  • Solved problem that TIN calculation during calculations can be very slow if the calculation area is not covered completely with elevation data.
  • If the computer loses the connection to a network drive so a .wpo cannot be found, windPRO will no longer overwrite it with an empty file once connection is re-established.
  • Loading a window layout from before version 3.1 no longer gives an exception
  • Fixed issue where importing coordinates from a GPX file would not allow deleting individual points
  • Fixed issue where multi-editing Shadow receptors would not properly save changes for receptor's slope
  • Fixed issue where having many World file background maps some parts would not be rendered
  • Fixed issue which prohibited adding some external WMS map servers
  • Added ability to export Area polygons as .grd files
  • Updated information in About window
  • Changed Help link to point to EMD support page
  • -
  • -

MCP

  • Fixed issue where the Measure tab would not calculate correlation (r) values if miniscule time shifts were present.
  • Fixed misspelling in Session report
  • Updated the mouseover hint next to "Show with residuals" to reflect the changes made between version 3.4 and 3.5

PARK

  • Fixed error with wrong sign being used when defining asymmetrical no-RIX correction intervals
  • Fixed issue where a warning message would sometimes not be shown when the selected temperature signal for curtailment evaluation had low availability
  • Fixed issue where having too many curtailment criteria, the result-table in the report Production analysis would sometimes be hidden behind the charts.
  • Fixed annoyance where various window labels would say "CFD area" or "WAsP", when using a .flowres file
  • Fixed typo for reference of Forsting's paper on blockage. The reference year has been corrected to 2017
  • Updated link to blockage description at main tab

RESOURCE

  • RESOURCE no longer ask for coordinate system after rescaling
  • A few bug-fixes in Resource-maps calibrations
  • A few bug-fixes in Resource-maps calibrations
  • A few bug-fixes in Resource-maps calibrations

DECIBEL

  • Fixed error where Ground attenuation would be initialized incorrectly for "Danish Codes"-model
  • Fixed issue when running Finnish noise model in combination with a mix of turbines using both PowerMatrix and Power/Noise pairs
  • German Interimsverfahren now uses emission side uncertainty by default
  • Added option to not show NSA-wise uncertainty on main report
  • Missing description

SHADOW

  • Fixes issue where saving time series as result to file with many receptors could cause an exception
  • Fixed issue where calculating SHADOW and deactivating line of sight could cause an exception
  • Defining the lower left (C) coordinate of a window now result in the same coordinates as defining lower right (D) with the calculated coordinates from C
  • Worst case WTG results now only appear on report if worst case calculation is selected in calculation properties

ZVI

  • Fixed issue in Radar Object where the user-defined Z value would be overridden by the TIN, even if TIN was deselected.
  • The Radar altitude is now printed in the report

SketchUp Integration tool

  • Fixed bug where the export would fail if exporting both "all visible objects" and "all selected objects" at the same time
  • Fixed bug where selecting to export a wtg with a user-defined rotor angle would anyway be exported with a random rotor angle
  • Fixed issue that SketchUp would not load after saving project to new folder.
  • Small visual fix in CFD export window
  • The wtg direction can now be entered

METEO

  • Fixed error where the resulting correction does not consider any applied magnetic declination
  • Fixed error where manually inputting magnetic declination would calculate a wrong resulting calibration
  • Fixed error where calibration would not always include the last sample
  • Fixed issue in Recalibration, where empty, 0 or 1 values for scale and offset would not be correctly handled
  • Fixed issue where merging two recalibration lines would sometimes be split again after closing and reopening the object
  • Fixed issue where recalibration would not be performed after loading additional data without visiting the Calibration page
  • Fixed issue where Meteo object .wpobject exports which referred to folders with a file mask would be saved in the project folder after re-imported, instead of the original file mask location
  • Fixed issue where right clicking an averaged sample in a gun shot graph could cause an exception
  • Fixed issue when clicking "Clear and load all" for >30 heights
  • Fixed issue where all the min/max columns in the RSD verification tool were swapped
  • Edited help text in "Merge wind speeds from 2 heights"
  • Added message to reload data after changing calibrations
  • Added ability to create a calibration period per import filter
  • When unpacking a project export, Meteo data now points to the relative path of the current project location, instead of the original absolute path from where the project was exported from.
  • Missing description
  • Missing description
  • Missing description
  • Missing description
  • Missing description

LOSS & UNCERTAINTY

  • Fixed error which underestimated curtailment losses when a huge amount of curtailment conditions per WTG were defined. If you think that this could have a significant impact on your project, make sure to recalculate losses in Loss & Uncertainty.
  • Fixed issue by copy-pasting of curtailments
  • Fixed issue by copy-pasting of curtailments
  • -
  • -

SITE COMPLIANCE

  • Fixed issue with incorrect WTG type in Details & assumptions report.
  • When using siteres: Other checks Earthquake and Lightning rate are now enabled pr default. Temperature check disabled
  • Hint added for reloading siteres files after changing design class or IEC edition
  • Changed description for frequency table based Meteo data
  • Added a warning when using checks based on energy weighted values, but there are sectors without energy.
  • Updated link for lightning map

TR10

  • Fixed error with incorrect gap-filling of production time series
  • Fixed issue where windPRO could get stuck when using the feature "separate error codes"
  • Fix in the correlation formula in the detailed method.
  • Added a default file name when saving a report as PDF
  • -
  • -
  • -

HYBRID

  • Fixed an error in the hourly minimum demand power values in report
  • Changed report layout for wind cost model
  • Fixed typo

MISCELLANEOUS

  • Solar PV: Fixed error where the total design area would not be the sum of all areas, but instead just the size of the last area
  • STATGEN: Fixed issue with an error message "meteo object must be inside the CFD result area" by STATGEN calculation with WAsP CFD.
  • Optimize: It is no longer required to have a MODEL license to use the optimizer
  • Performance Check: Fixed a typo in "User Error code setup"
  • Performance Check: Added ability to view Load/Review tab for the "Error codes in time series" concept
  • PHOTOMONTAGE: Fixed problem that Photomontage window sometimes freezes for short periods
  • Technical: Added shortcuts for Calculation tester, WAsPResCalc and EMDPlayer


Awaiting test:

  • PARK Fixed issue where the "Edit WAsP parameters" button in scaler setup would not turn yellow
  • SICOM Missing description

This category currently contains no pages or media.

Retrieved from "http://help.emd.dk/mediawiki/index.php?title=Category:WindPRO_3.5_Service_Pack_1&oldid=13964"