Category:WindPRO 3.4 Service Pack 3: Difference between revisions

From Wiki-WindPRO
Jump to navigation Jump to search
No edit summary
No edit summary
 
(4 intermediate revisions by the same user not shown)
Line 1: Line 1:
===BASIS===
===BASIS===
*Fixed issue where opening a .w33e file in 3.4 could make the information about the calcualation duration lenght and finishing time disappear.{{Templink34SP3|01_2761}}
*Fixed issue where opening a .w33e file in 3.4 could make the information about the calcualation duration lenght and finishing time disappear. {{Templink34SP3|01_2761}}
*Fixed issue where an Area object could cause windPRO to slow down.{{Templink34SP3|01_2777}}
*Fixed issue where an Area object could cause windPRO to slow down. {{Templink34SP3|01_2777}}


===PARK===
===PARK===
*'''[TGS]''' Fixed issue where {{Templink34SP3|01_2819}}
*Fixed error where PARK calculations with resource files would not accept operation mode curtailments. {{Templink34SP3|04_0725}}
*Fixed error where PARK calculations with resource files would not accept operation mode curtailments.{{Templink34SP3|04_0725}}
*Fixed issue when running a calculation with two .rsf files at different heights using PARK2. {{Templink34SP3|01_2819}}
*Fixed issue where activating both start-stop times and certain curtailments could cause an exception. {{Templink34SP3|04_0745}}


===SHADOW===
===SHADOW===
*'''[TJ]'''Timeseries=zero shadow hours{{Templink34SP3|07_0201}}
*Fixed error when using a Weibull distribution from Meteo with 0 (zero) value for A or k parameters at a height different from hub height. {{Templink34SP3|07_0201}}


===LOSS & UNCERTAINTY===
===LOSS & UNCERTAINTY===
*Fixed annoyance where Print setup would display wrong icon
*Fixed annoyance where Print setup would display wrong icon. {{Templink34SP3|27_0177}}
*Fixed issue where the experimental grid curtailment loss in PARK, would not be included in the annual yield loaded into Loss & Uncertainty.
*Fixed issue where the experimental grid curtailment loss in PARK, would not be included in the annual yield loaded into Loss & Uncertainty. {{Templink34SP3|27_0178}}


===SITE COMPLIANCE===
===SITE COMPLIANCE===
*Fixed rare issue in ETM calculation causing an exception.
*Fixed rare issue in ETM calculation causing an exception. {{Templink34SP3|29_0379}}


===PERFORMANCE CHECK===
===PERFORMANCE CHECK===
*Fixed issue where cancelling the selection of a particular filter in the filter options in the analysis-analyser would still activate the filter.{{Templink34SP3|33_0607}}
*Fixed issue where cancelling the selection of a particular filter in the filter options in the analysis-analyser would still activate the filter. {{Templink34SP3|33_0607}}
*Fixed issue where configuring the report setup to display borders would cause the Post-Construction report to not print the calculation methodology description.{{Templink34SP3|33_0623}}
*Fixed issue where configuring the report setup to display borders would cause the Post-Construction report to not print the calculation methodology description. {{Templink34SP3|33_0623}}
*Fixed issue with handling of time zones, when time zone of imported SCADA data differs from the time zone in Project properties.
*Fixed issue with handling of time zones, when time zone of imported SCADA data differs from the time zone in Project properties. {{Templink34SP3|33_0626}}
*Fixed issue with erroneously calculated MTTR and MTBF, when the time window is manually set.
*Fixed issue with erroneously calculated MTTR and MTBF, when the time window is manually set. {{Templink34SP3|33_0627}}

Latest revision as of 13:08, 2 July 2021

BASIS

  • Fixed issue where opening a .w33e file in 3.4 could make the information about the calcualation duration lenght and finishing time disappear.
  • Fixed issue where an Area object could cause windPRO to slow down.

PARK

  • Fixed error where PARK calculations with resource files would not accept operation mode curtailments.
  • Fixed issue when running a calculation with two .rsf files at different heights using PARK2.
  • Fixed issue where activating both start-stop times and certain curtailments could cause an exception.

SHADOW

  • Fixed error when using a Weibull distribution from Meteo with 0 (zero) value for A or k parameters at a height different from hub height.

LOSS & UNCERTAINTY

  • Fixed annoyance where Print setup would display wrong icon.
  • Fixed issue where the experimental grid curtailment loss in PARK, would not be included in the annual yield loaded into Loss & Uncertainty.

SITE COMPLIANCE

  • Fixed rare issue in ETM calculation causing an exception.

PERFORMANCE CHECK

  • Fixed issue where cancelling the selection of a particular filter in the filter options in the analysis-analyser would still activate the filter.
  • Fixed issue where configuring the report setup to display borders would cause the Post-Construction report to not print the calculation methodology description.
  • Fixed issue with handling of time zones, when time zone of imported SCADA data differs from the time zone in Project properties.
  • Fixed issue with erroneously calculated MTTR and MTBF, when the time window is manually set.

This category currently contains no pages or media.

Retrieved from "http://help.emd.dk/mediawiki/index.php?title=Category:WindPRO_3.4_Service_Pack_3&oldid=13443"