Oldest pages
Jump to navigation
Jump to search
Showing below up to 50 results in range #221 to #270.
- Bug in "Save as PDF" for MCP (11:28, 18 July 2018)
- Fixed error for maps with max noise, e.g. Norwegian (11:29, 18 July 2018)
- Fixed error for noise maps with Lden needing recalculation of noise data to hub height (11:29, 18 July 2018)
- Lden selection was not ported from calculation in 3.1 to 3.2 (11:29, 18 July 2018)
- Error in Finnish low frequency calculation has been fixed (11:30, 18 July 2018)
- Turbulence data for wake models based on turbulence were not shown in advanced setup (11:30, 18 July 2018)
- Park2 wake model from WAsP 12 has been fully implemented in 3.2 (11:32, 18 July 2018)
- Abgleichszeitraum (17:18, 20 July 2018)
- Jahreszeiten/Tag-Nacht Einstellungen (12:05, 26 July 2018)
- Handbuch MCP (16:38, 26 July 2018)
- MCP2005-Überblick (16:43, 26 July 2018)
- Windows 10 Symphonie File Reader (09:56, 24 September 2018)
- ORA Classes Lengths (09:57, 24 September 2018)
- ORA Background elevation and holdes (09:58, 24 September 2018)
- SHADOW reporting speed (10:22, 24 September 2018)
- SHADOW speed of opening properties (10:23, 24 September 2018)
- SHADOW (10:24, 24 September 2018)
- SHADOW large areas (10:24, 24 September 2018)
- NORD2000 map for statistical (10:26, 24 September 2018)
- WINDBANK report (10:27, 24 September 2018)
- Lösungen: Inkonsistente Ergebnisse (16:18, 29 October 2018)
- Handbuch PARK (18:23, 1 November 2018)
- Selection of multiple .kmz files not possible (16:43, 15 November 2018)
- Re-runs of METEO (AEP one position, measured wind data) calculations could in specific cases change the setup (10:46, 20 November 2018)
- Error when using sector wise displacement height in Meteo profile. (16:57, 21 November 2018)
- Erroneous display of PARK and MODEL selection of Weibull/Measure (16:58, 21 November 2018)
- LOAD RESPONSE - error in inflow angle (leads to very small errors on loads) (17:00, 21 November 2018)
- SITE COMPLIANCE - error in displacement height in wind shear calculation (17:01, 21 November 2018)
- Shadow in avoided flicker could cause error (17:01, 21 November 2018)
- RESOURCE with WAsP 12 and sector wise displacement height could crash (17:02, 21 November 2018)
- Streetview importer did not work (17:03, 21 November 2018)
- Error prevented project save (17:04, 21 November 2018)
- Unterschiede zwischen WAsP-Versionen (16:16, 10 December 2018)
- Park-Design-Objekt (21:25, 10 December 2018)
- Einfache Windindex-Korrektur mit MCP und Tabellenprogramm (18:25, 8 January 2019)
- WEA-Typ im Katalog anlegen (12:17, 28 January 2019)
- PARK time varying calculation with scaler based on CFD (08:43, 26 February 2019)
- PARK load calculation setup improved (08:46, 26 February 2019)
- Loss and Uncertainty wind sector management report (08:51, 26 February 2019)
- NORD2000 LF Report shows frequency distribution (08:53, 26 February 2019)
- IEC61400-12-1 GK support and result to file (10:41, 28 February 2019)
- WAsP Profile with displacement height (10:45, 28 February 2019)
- WindPRO3.2-by-build (11:24, 5 April 2019)
- Kontaktieren des Supports (15:21, 12 April 2019)
- GeoCover Images (09:18, 30 April 2019)
- Performing Regression Test of windPRO (14:54, 10 May 2019)
- Import/Export von Shape-Dateien in windPRO (13:40, 26 June 2019)
- XML templates for windPRO projects (13:16, 16 July 2019)
- Dynamic maps (15:20, 12 August 2019)
- ÜSTÜN windPROSPER maps (16:26, 16 October 2019)