Copernicus DEM: Difference between revisions
(53 intermediate revisions by 2 users not shown) | |||
Line 1: | Line 1: | ||
[[Category: Online Data]][[Category: Digital Elevation Models]] | [[Category: Online Data]][[Category: Digital Elevation Models]][[File:Coverage_FromProductTiles.png|thumb|right|500px|Global coverage for the Copernicus DEM's. Each tile (green square) is 1x1 degree and the full dataset is approximately 26500 tiles.]][[File:TandemX_Formation.png|thumb|right|500px|Image showing the two radar satellites TanDEM-X and TerraSAR-X in close formation flight at a distance of 350m apart. The TanDEM-X mission is the data-source for the Copernicus DEM's. Image: Credit DLR (CC-BY-3.0)]] | ||
'' | [[File:25m_Contours_Zugspitze.png|thumb|right|500px|CopernicusDEM in action within windPRO 3.5: 25m contour lines and elevation-grid at Zugspitze, Germany]] | ||
[[File:windturbines-error.png|thumb|right|500px|Distribution of vertical elevation error at 3600 turbine locations. Two datasets are shown: CopernicusDEM-30m (blue) and SRTM-30m (orange).]] | |||
== Introduction == | == Introduction == | ||
The Copernicus Digital Elevation Models (DEM) - or short Copernicus DEMs - is a set of DEM's with global coverage released from the European Space Agency (ESA). Two versions of | The Copernicus Digital Elevation Models (DEM) - or short Copernicus DEMs - is a set of DEM's with global coverage released from the European Space Agency (ESA). Two versions (or instances) of this dataset are available to the general public: a global model at 90m resolution (Copernicus DEM GLO-90) and a near-global model at 30m resolution (Copernicus DEM GLO-30). The Copernicus DEM is a digital surface model (DSM) so it includes all surface structures - like buildings, infrastructure and forests. The Copernicus DEM is derived from an edited DSM named WorldDEM™ with the WorldDEM™ model being based on radar satellite data from the TanDEM-X mission. The WorldDEM model has been infilled on a local basis with other DEMs, such as [[Aster_Global_Digital_Elevation_Model|ASTER]], [[Shuttle_Radar_Topography_Mission|SRTM90]], [[Shuttle_Radar_Topography_Mission|SRTM30]], SRTM30plus, GMTED2010, TerraSAR-X Radargrammetric DEM and [[Global_AW3D30|ALOS World 3D-30m]]. | ||
=== Dataset Overview === | === Dataset Overview === | ||
* '''Spatial Coverage:''' Global | * '''Spatial Coverage:''' | ||
** ''Copernicus DEM GLO-30:'' Global (however, see usage notes below) | |||
** ''Copernicus DEM GLO-90:'' Global | |||
* '''Resolution:''' 30m (1-arc-second) and 90m (3-arc-second) grid resolution. | * '''Resolution:''' 30m (1-arc-second) and 90m (3-arc-second) grid resolution. | ||
* '''Data-type:''' [[:Category%3ADigital_Elevation_Models#What_type_of_elevation_model.3F_DEM.2C_DSM_and_DTM.3F|Digital Surface Model (DSM)]] | * '''Data-type:''' [[:Category%3ADigital_Elevation_Models#What_type_of_elevation_model.3F_DEM.2C_DSM_and_DTM.3F|Digital Surface Model (DSM)]] | ||
* '''Coordinate system | * '''Coordinate system''' | ||
* '' | ** ''Horizontal:'' Geographic WGS (EPSG:4326) | ||
* '''Version:''' Data accessed | ** ''Vertical:'' Earth Gravitational Model - EGM2008 geoid (EPSG: 3855) | ||
* '''Version:''' | |||
** Data accessed and prepared for use in windPRO during June 2021. | |||
** The data acquisition period for the WorldDEM(TM) mission is 2010-2015. | |||
* '''Vertical Accuracy''' (according to product manual): | * '''Vertical Accuracy''' (according to product manual): | ||
** ''Absolute vertical accuracy:'' Less than 4m (90% linear error) | ** ''Absolute vertical accuracy:'' Less than 4m (90% linear error) | ||
Line 18: | Line 23: | ||
* '''No data value:''' -32767 (in original data) | * '''No data value:''' -32767 (in original data) | ||
== Usage Notes == | == Validation and Usage Notes == | ||
* The spatial resolution of the raw Copernicus DEM is fixed in meters (30m or 90m), but the raw data-tiles are still stored with geographical coordinates. As such, the resolution in longitude-direction is varying with latitude. For the data in windPRO, all Copernicus DEM data has been resampled into a fixed resolution in decimal degrees using a bi-linear interpolation algorithm. The 30m dataset is stored with a global 1-arc-second resolution and the 90m dataset as a global 3-arc-second resolution. | * '''How accurate is the CopernicusDEM when compared against other global elevation datasets such as SRTM, NASADEM and AW3D30?'''<br>We have prepared a small validation note - based on data from 3600 wind turbine locations and 12000 runways. The note is intended to document the benefits of using CopernicusDEM - read more [https://help.emd.dk/mediawiki/images/a/ae/20210920_AccuracyCopernicusDEM.pdf here]. | ||
* For the windPRO 30m Copernicus dataset, the missing (non-released) tiles have been patched with data from the 90m | * '''How is the varying spatial resolution handled?'''<br>The spatial resolution of the raw Copernicus DEM is fixed in meters (30m or 90m), but the raw data-tiles are still stored with geographical coordinates. As such, the resolution in longitude-direction is varying with latitude. For the data in windPRO, all Copernicus DEM data has been resampled into a fixed resolution in decimal degrees using a bi-linear interpolation algorithm. The 30m dataset is stored with a global 1-arc-second resolution and the 90m dataset as a global 3-arc-second resolution. | ||
* '''What about the missing tiles within the original Copernicus-30m dataset?'''<br>For the windPRO 30m Copernicus dataset, the missing (non-released) tiles have been patched with data from the 90m dataset. These tiles have been resampled to the 30m grid resolution. A list of all affected tiles can be found [https://help.emd.dk/mediawiki/images/9/92/Non-released-tiles_GLO-30_PUBLIC_Dec.xlsx here] (currently, 40 tiles in Armenia and Azerbaijan are affected). | |||
* '''Why is the Copernicus DEM - EEA10 instance not available in windPRO (39 European states in 10m grid resolution)?'''<br>The EEA-10 instance is a restricted dataset - it is not available as an open dataset. If you need a this (or a similar) higher resolution dataset, these are commercially available throgh 3rd party resellers (such as Airbus, DHI-GRAS, GAG-AG & NTT-Data). Read more on 3rd party commercial DEM providers - [[Commercial_DEM_Providers|here]]. | |||
== Availability from within windPRO == | == Availability from within windPRO == | ||
The DSM-data is available directly from within windPRO. The DSM elevation data is delivered as gridded data with a spatial resolution of 1 or 3 arc second. As a part of the processing of the DSM elevation data from our EMD server, the user has an option of choosing whether the data downloaded should be received as either raw gridded data or converted to height contour lines | The DSM-data is available directly from within windPRO 3.4+. The DSM elevation data is delivered as gridded data with a spatial resolution of 1 or 3 arc second. As a part of the processing of the DSM elevation data from our EMD server, the user has an option of choosing whether the data downloaded should be received as either raw gridded data or converted to height contour lines. These data be accessed from the online-services in the following two objects: | ||
* DSM-Data in the '''line object''' (with purpose to height contour lines) | * DSM-Data in the '''line object''' (with purpose to height contour lines) | ||
Line 29: | Line 36: | ||
== Acknowledgement == | == Acknowledgement == | ||
The European Commission, the European Space Agency and the Copernicus team are acknowledged for the development and release of the free and open Copernicus data. We | * The European Commission, the European Space Agency and the Copernicus team are acknowledged for the development and release of the free and open Copernicus data. | ||
* Credit: © DLR e.V.(2014-2018) and © Airbus Defence and Space GmbH (2021) provided under COPERNICUS by the European Union and ESA; all rights reserved. | |||
* We acknowledges the importance of releasing the Copernicus DEM's into the public domain and its contribution to improve modelling of the renewable energy sources - and wind energy in particular. | |||
== License == | == License == | ||
The 30m and 90m Copernicus DEM datasets are available as free datasets for the general public under the terms and conditions of the License found | The 30m and 90m Copernicus DEM datasets are available as free datasets for the general public under the terms and conditions of the License found here as [https://help.emd.dk/mediawiki/images/f/f4/20210615_CSCDA_ESA_Mission-specific_Annex.pdf pdf]. Please consult this License document for details on usage conditions and be aware to provide one of the following notifications when communicating to the general public or distributing the data: | ||
<pre> | |||
Copernicus DEM GLO-90 (Copernicus WorldDEM™-90) or Copernicus DEM GLO-30 (Copernicus WorldDEM™-30) - unmodified data: | |||
- © DLR e.V. 2010-2014 and © Airbus Defence and Space GmbH 2014-2018 provided under COPERNICUS by the European Union and ESA; | |||
all rights reserved. | |||
Copernicus DEM GLO-90 (Copernicus WorldDEM™-90) - adapted or modified data: | |||
- Produced using Copernicus WorldDEM™-90 © DLR e.V. 2010-2014 and © Airbus Defence and Space GmbH 2014-2018 provided under COPERNICUS by the European Union and ESA; | |||
all rights reserved. | |||
Copernicus DEM GLO-30 (Copernicus WorldDEM™-30) - adapted or modified data: | |||
- Produced using Copernicus WorldDEM-30 © DLR e.V. 2010-2014 and © Airbus Defence and Space GmbH 2014-2018 provided under COPERNICUS by the European Union and ESA; | |||
all rights reserved”. | |||
</pre> | |||
== Links and More Documentation == | == Links and More Documentation == | ||
* | * Copernicus DEM - at European Space Agency - [https://spacedata.copernicus.eu/web/cscda/dataset-details?articleId=394198 here] | ||
* | * Copernicus DEM - Product Handbook (version 3.0) [https://spacedata.copernicus.eu/documents/20126/0/GEO1988-CopernicusDEM-SPE-002_ProductHandbook_I3.0+%281%29.pdf here] - (pdf format) | ||
* Copernicus DEM - Validation Report (version 1.0) [https://spacedata.copernicus.eu/documents/20126/0/GEO1988-CopernicusDEM-RP-001_ValidationReport_V1.0.pdf here] - (pdf format) |
Latest revision as of 16:33, 29 September 2021
![](/mediawiki/images/thumb/9/96/Coverage_FromProductTiles.png/500px-Coverage_FromProductTiles.png)
![](/mediawiki/images/thumb/c/ce/TandemX_Formation.png/500px-TandemX_Formation.png)
![](/mediawiki/images/thumb/1/1a/25m_Contours_Zugspitze.png/500px-25m_Contours_Zugspitze.png)
![](/mediawiki/images/thumb/4/4d/Windturbines-error.png/500px-Windturbines-error.png)
Introduction
The Copernicus Digital Elevation Models (DEM) - or short Copernicus DEMs - is a set of DEM's with global coverage released from the European Space Agency (ESA). Two versions (or instances) of this dataset are available to the general public: a global model at 90m resolution (Copernicus DEM GLO-90) and a near-global model at 30m resolution (Copernicus DEM GLO-30). The Copernicus DEM is a digital surface model (DSM) so it includes all surface structures - like buildings, infrastructure and forests. The Copernicus DEM is derived from an edited DSM named WorldDEM™ with the WorldDEM™ model being based on radar satellite data from the TanDEM-X mission. The WorldDEM model has been infilled on a local basis with other DEMs, such as ASTER, SRTM90, SRTM30, SRTM30plus, GMTED2010, TerraSAR-X Radargrammetric DEM and ALOS World 3D-30m.
Dataset Overview
- Spatial Coverage:
- Copernicus DEM GLO-30: Global (however, see usage notes below)
- Copernicus DEM GLO-90: Global
- Resolution: 30m (1-arc-second) and 90m (3-arc-second) grid resolution.
- Data-type: Digital Surface Model (DSM)
- Coordinate system
- Horizontal: Geographic WGS (EPSG:4326)
- Vertical: Earth Gravitational Model - EGM2008 geoid (EPSG: 3855)
- Version:
- Data accessed and prepared for use in windPRO during June 2021.
- The data acquisition period for the WorldDEM(TM) mission is 2010-2015.
- Vertical Accuracy (according to product manual):
- Absolute vertical accuracy: Less than 4m (90% linear error)
- Relative vertical accuracy: Less than 2m for slope <20%. Less than 4m for slope >20%.
- Absolute horizontal accuracy: <6m (90% circular error)
- No data value: -32767 (in original data)
Validation and Usage Notes
- How accurate is the CopernicusDEM when compared against other global elevation datasets such as SRTM, NASADEM and AW3D30?
We have prepared a small validation note - based on data from 3600 wind turbine locations and 12000 runways. The note is intended to document the benefits of using CopernicusDEM - read more here. - How is the varying spatial resolution handled?
The spatial resolution of the raw Copernicus DEM is fixed in meters (30m or 90m), but the raw data-tiles are still stored with geographical coordinates. As such, the resolution in longitude-direction is varying with latitude. For the data in windPRO, all Copernicus DEM data has been resampled into a fixed resolution in decimal degrees using a bi-linear interpolation algorithm. The 30m dataset is stored with a global 1-arc-second resolution and the 90m dataset as a global 3-arc-second resolution. - What about the missing tiles within the original Copernicus-30m dataset?
For the windPRO 30m Copernicus dataset, the missing (non-released) tiles have been patched with data from the 90m dataset. These tiles have been resampled to the 30m grid resolution. A list of all affected tiles can be found here (currently, 40 tiles in Armenia and Azerbaijan are affected). - Why is the Copernicus DEM - EEA10 instance not available in windPRO (39 European states in 10m grid resolution)?
The EEA-10 instance is a restricted dataset - it is not available as an open dataset. If you need a this (or a similar) higher resolution dataset, these are commercially available throgh 3rd party resellers (such as Airbus, DHI-GRAS, GAG-AG & NTT-Data). Read more on 3rd party commercial DEM providers - here.
Availability from within windPRO
The DSM-data is available directly from within windPRO 3.4+. The DSM elevation data is delivered as gridded data with a spatial resolution of 1 or 3 arc second. As a part of the processing of the DSM elevation data from our EMD server, the user has an option of choosing whether the data downloaded should be received as either raw gridded data or converted to height contour lines. These data be accessed from the online-services in the following two objects:
- DSM-Data in the line object (with purpose to height contour lines)
- DSM-Data in the elevation grid object
Acknowledgement
- The European Commission, the European Space Agency and the Copernicus team are acknowledged for the development and release of the free and open Copernicus data.
- Credit: © DLR e.V.(2014-2018) and © Airbus Defence and Space GmbH (2021) provided under COPERNICUS by the European Union and ESA; all rights reserved.
- We acknowledges the importance of releasing the Copernicus DEM's into the public domain and its contribution to improve modelling of the renewable energy sources - and wind energy in particular.
License
The 30m and 90m Copernicus DEM datasets are available as free datasets for the general public under the terms and conditions of the License found here as pdf. Please consult this License document for details on usage conditions and be aware to provide one of the following notifications when communicating to the general public or distributing the data:
Copernicus DEM GLO-90 (Copernicus WorldDEM™-90) or Copernicus DEM GLO-30 (Copernicus WorldDEM™-30) - unmodified data: - © DLR e.V. 2010-2014 and © Airbus Defence and Space GmbH 2014-2018 provided under COPERNICUS by the European Union and ESA; all rights reserved. Copernicus DEM GLO-90 (Copernicus WorldDEM™-90) - adapted or modified data: - Produced using Copernicus WorldDEM™-90 © DLR e.V. 2010-2014 and © Airbus Defence and Space GmbH 2014-2018 provided under COPERNICUS by the European Union and ESA; all rights reserved. Copernicus DEM GLO-30 (Copernicus WorldDEM™-30) - adapted or modified data: - Produced using Copernicus WorldDEM-30 © DLR e.V. 2010-2014 and © Airbus Defence and Space GmbH 2014-2018 provided under COPERNICUS by the European Union and ESA; all rights reserved”.