Difference between revisions of "WindPRO3.2-by-build"

@@ Line 1: / Line 1: @@
+'''Build 744'''
+:Fixed an issue when running large calculations in SITE COMPLIANCE using CFD tiles.
+:Fixed an issue with user defined film formats when printing PHOTOMONTAGE reports.
+'''Build 743'''
+:This build fixes an issue with Loss and Uncertainty reports having blank names.
+'''Build 742'''
+Released as [[:Category:WindPRO 3.2 Service Pack 4|Service Pack 4]]
+:[[WAsP Profile with displacement height]]
+:[[PARK time varying calculation with scaler based on CFD]]
+:[[PARK load calculation setup improved]]
+:[[IEC61400-12-1 GK support and result to file]]
+:[[Loss and Uncertainty wind sector management report]]
+:[[NORD2000 LF Report shows frequency distribution]]
+'''Build 734'''
+:[[Selection of multiple .kmz files not possible]]
+:[[Error prevented project save]]
+:[[Streetview importer did not work]]
+:[[RESOURCE with WAsP 12 and sector wise displacement height could crash]]
+:[[Shadow in avoided flicker could cause error]]
+:[[SITE COMPLIANCE - error in displacement height in wind shear calculation]]
+:[[LOAD RESPONSE - error in inflow angle (leads to very small errors on loads)]]
+:[[Erroneous display of PARK and MODEL selection of Weibull/Measure]]
+:[[Error when using sector wise displacement height in Meteo profile.]]
+:[[NORD2000 map for statistical]]
+:[[ORA Background elevation and holdes|ORA Background elevation and holes fixed]]
+:[[ORA_Classes_Lengths|ORA classes/lengths swapped]]
+:[[SHADOW large areas|SHADOW handling large areas]]
+:[[SHADOW reporting speed|SHADOW reporting speed increase]]
+:[[SHADOW speed of opening properties|SHADOW speed of opening properties increase]]
+:[[WINDBANK report|WINDBANK report i landscape]]
+:[[Windows 10 Symphonie File Reader]]
+'''Build 712'''
+Released as [[:Category:WindPRO 3.2 Service Pack 2|Service Pack 2]]
+'''Build 711'''
+:[[Park2 wake model from WAsP 12 has been fully implemented in 3.2]]
+:[[Turbulence data for wake models based on turbulence were not shown in advanced setup]]
+'''Build 709'''
+:[[NSA Restriction Areas Painted Wrong]]
+'''Build 708'''
+:[[Error in Finnish low frequency calculation has been fixed]]
+:[[Lden selection was not ported from calculation in 3.1 to 3.2]]
+:[[Fixed error for noise maps with Lden needing recalculation of noise data to hub height]]
+:[[Fixed error for maps with max noise, e.g. Norwegian]]
+'''Build 705'''
+:[[Changing auto detected logger setup columns]]
+'''Build 704'''
+:[[Bug in "Save as PDF" for MCP]]
+:[[Bug in wake loss calculation when using curtailment]]
+'''Build 702'''
+:[[Flagging wind directions]]
+:[[NORD2000 and elevation grid]]
+'''Build 701'''
+Released as [[:Category:WindPRO 3.2 Service Pack 1|Service Pack 1]]
+'''Build 700'''
+:[[NSA Restriction Areas Not Shown]]
+:[[ORA Problem With Roughness Lines Boundaries]]
+:[[Painting of many shadow or NSA objects is slow]]
+'''Build 699'''
+:[[Pasting many objects in object list is slow]]
+:[[Error importing xyz files with zone in x coordinate]]
+'''Build 695'''
+:[[New Data Protection policy window (GDPR)]]
+:[[Photomontage - Draft mode change]]
+:[[Noise maps did not work for shut down WTGs]]
+'''Build 687'''
+:[[Report map not shown in landscape format]]
+'''Build 685'''
+:[[Save reports in .WMF format]]
+'''Build 684'''
+:[[Pasting frequency body only]]
 '''Build 683'''
-:[[Add_scaled_height_crashes]]
+:[[Relative humidity missing in air density setup]]
+:[[Add scaled height crashes]]
+:[[Choice of Individual noise data not remembered]]
+:[[Online Connection Issues]]
+:[[Park efficiency reintroduced]]
+:[[Topographic shadow calculation did not work]]
 '''Build 672'''
@@ Line 9: / Line 114: @@
 :[[Writing multiple timeseries to meteo object from MCP2005]]
 :[[MCP Changes in time offset when using Averaging]]
+:[[MCP Changes; limit periods moved to "Measure" tab, "Filters" renamed to "Adjustments"]]
 '''Build 669'''
 First release version

Difference between revisions of "WindPRO3.2-by-build"

Latest revision as of 11:24, 5 April 2019

Navigation menu

Search