Category:Digital Elevation Models

Introduction

The digital height models in WindPRO are based on many different national and global sources. The best globally-available DHM source remains the Shuttle Radar Topography Mission (SRTM) data - in its 1-arc-second resolution, but more countries are releasing national data under open-data licenses. Typically these have a much better resolution than SRTM - and it is often recommended to use local sources for DEM modelling - if such higher-quality are available for a particular site.

Let us know!

EMD and the windPRO team are continiously working to add better and highter quality DEM's into the data-services of windPRO - so please let us know if you know of data-sources that you would like to see in windPRO. Just drop us an email at support@emd.dk.

Considerations

When using the remote sensing digital height models, you must manually consider the accuracy of the dataset used. This is especially important in the vicinity of the wind farm and other associated objects such as meteorological masts, noise and shadow receptors and photomontage viewpoints. Typically – when applying remote sensing DEM's - the height contour lines must be validated against a local topographical map. In addition, many of the wiki-pages in here provide links to further documentation and an overview of vertical and horizontal acurracy.

What type of elevation model? DEM, DSM and DTM?

For wind energy applications, it is important to undserstand if the elevation model is a DEM, DSM or a DTM - so if objects (like buildings or trees) have been included in the model. In windPRO we use the following abbriations when dealing with DEM's.

1. DEM (Digital Elevation Model) - Is often used as a generic term for both DSM's and DTM's.
2. DSM (Digital Surface Model) - Is a surface representation with objects.
3. DTM (Digital Terrain Model) - Is the bare earth representation without objects.

Recommendations

A study on DEM quality by EMD - "High Fidelity Elevation Models - What is the Value in Microscale Modelling" was presented at the WindEurope Wind Resource Workshop in Brussels 2019. Main recommendations from this study - concerning the use of DEM's in a wind resource modelling framework - were:

Do not use (or take special care when using)

• [Shuttle_Radar_Topography_Mission|SRTM3 - 90m data] (use SRTM1 - 30m data instead)
• EU-DEM - 30m data (at least, consider which country you are in - and if >60 degrees north)